Notices
The Classifieds GraveYard Where old classifieds threads go that are too good to let go

trannies, bumpers, brush guard, swaybars

Thread Tools
 
Search this Thread
 
Old Apr 26, 2008 | 03:31 PM
  #1  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
trannies, bumpers, brush guard, swaybars

Here are a few items that I have collected due to upgrades. I need to get rid of them so all prices are flexible. Shipping is on the buyer. I am reluctant to ship the big items; however, I will for the right price or legwork. All prices are negotiable. Please feel free to ask questions. Located in Clarksville, TN 37043.

Great brushguard. Zero fitment issues. I am only selling it because I've built a bumper and about to SAS. - $200


Herculined front bumper. Only selling due to above reason. Herculiner is faded, but some black paint would bring back the shine. There are two holes in the top for foglights. - $75

http://i120.photobucket.com/albums/o...t/fbumper2.jpg

Herculined rear bumper. Once again, selling due to above reasons. The plastic top runner has a cut-out for a C.B. antenna as does the side of the bumper. The bottom-right of the bumper had a rip from my buddy's jeep putting its towhook in it. It's very hard to see and can be bent back in place with a crescent wrench (I may do it before it sells). The Herculiner is in the same condition as the front bumper. - $40




One front swaybar and one rear swaybar from a 1995 4Runner. They're in good condition. - $40 a piece.


R150F transmission and VF1A transfer case. The transmission has a crack in the housing. The transfer case needs a new rear output shaft seal. - Tranny - $50. T-case - $50. Both - $80.


TH350 2wd tranny. In great condition. Used in my sister's C10 until we put a 700R4 in for her commute to college. - $250

Last edited by Spinnbait; Apr 26, 2008 at 03:40 PM.
Old Apr 26, 2008 | 04:00 PM
  #2  
4RunnerFreedom's Avatar
Registered User
 
Joined: Apr 2008
Posts: 82
Likes: 0
From: Ypsilanti, MI
what gen 4runner does the brush gaurd fit? same goes for front and rear bumpers.

i'm interested if it works with an 88. shipping can be done cheaply via Grey Hound bus

Last edited by 4RunnerFreedom; Apr 26, 2008 at 04:01 PM.
Old Apr 26, 2008 | 06:47 PM
  #3  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
1995 4Runner. I'm not sure about your application. If the bolt holes for your front "tow hooks" are in the same location then it will bolt up. I do not have a problem shipping if the buyer takes care of the costs (in addition to the asking price).
Old Apr 27, 2008 | 04:23 PM
  #4  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
All prices are negotiable. I would like to get these outta my garage without just throwing them away...
Old Apr 28, 2008 | 03:39 PM
  #5  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
I don't really know what all of this is worth to anybody, so just throw out an offer if there is interest.
Old May 3, 2008 | 05:27 PM
  #6  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
This stuff can go cheaper than the listed price. Just throw out anything reasonable/ trades. I also have all 4 rear links and 2 CV's (will be 4 before long).
Old May 5, 2008 | 03:36 PM
  #7  
Nebrkid817's Avatar
Registered User
 
Joined: Mar 2008
Posts: 55
Likes: 0
From: Plattsmouth, Nebraska
would that grille guard fit a '88 4X4 pickup??
Old May 5, 2008 | 05:08 PM
  #8  
mudtoy1986's Avatar
Registered User
 
Joined: Feb 2008
Posts: 138
Likes: 0
wel i know a lil about fit and the grill gaurd will fit 89 toy 95 truck and 90 to 95 runner thats direct fit but ya always could make it work with the 88 i sold my old brush gaurd to a guy with an 84 and i own a 90 p/u
hey on the trany how low will ya go and where ya located
Old May 5, 2008 | 05:36 PM
  #9  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
$50 is pretty low for a working transmission, despite the crack. I am in Clarksville, TN 37043 (Northern-middle TN).
Old May 5, 2008 | 05:50 PM
  #10  
attitude's Avatar
Registered User
 
Joined: May 2008
Posts: 8
Likes: 0
From: Tulsa, OK
Would you be willing to ship the brush guard? I am in Tulsa OK. markkcrane@hotmail.com
Old May 5, 2008 | 06:07 PM
  #11  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
Yeah, I can probably find a way to box it as long as you pay for the shipping.
Old May 14, 2008 | 07:52 PM
  #12  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
any interest?
Old May 15, 2008 | 09:50 AM
  #13  
terrybo3's Avatar
Registered User
 
Joined: Jan 2008
Posts: 134
Likes: 0
From: Clearwater, Florida
I live in Florida, but I'm from Nashville...could you drop the rear herculiner bumper off at a business in Metrocenter? What's your bottom dollar?
Old May 15, 2008 | 09:14 PM
  #14  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
$40 is pretty fair. I rarely go to nashville and it would cost me that in gas to go. I apologize.
Old May 16, 2008 | 03:29 AM
  #15  
wardriver's Avatar
Registered User
 
Joined: Jul 2007
Posts: 347
Likes: 0
From: 26.3 road miles from the AT (VA)
Do you know what brand that brush guard is? Also do you happen to know the weight and how wide it is? (for shipping costs)
Old Jun 30, 2008 | 08:19 PM
  #16  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
Hey guys, sorry if I missed any replies or pms. I've been a bit busy here lately. However, if anybody wants this stuff, just let me know what you're interested in and a fair price on both sides. I promise to be more responsive as I think I missed a few questions.
Old Jun 30, 2008 | 08:26 PM
  #17  
swaysidelife's Avatar
Registered User
 
Joined: Jun 2008
Posts: 163
Likes: 0
From: tacoma washington
ill buy the brush guard. shipping doesnt bother me at all.

Last edited by swaysidelife; Jun 30, 2008 at 08:28 PM.
Old Jul 2, 2008 | 02:06 PM
  #18  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
everything still up for grabs...
Old Jul 13, 2008 | 06:29 PM
  #19  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
Anybody?
Old Jul 20, 2008 | 10:00 PM
  #20  
Spinnbait's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 355
Likes: 0
Does anybody want this stuff??



All times are GMT -8. The time now is 02:15 PM.