Notices
The Classifieds GraveYard Where old classifieds threads go that are too good to let go

PARTING - 1992 SR5 4Runner 4x4

Thread Tools
 
Search this Thread
 
Old Aug 21, 2006 | 03:40 AM
  #101  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
Tom (Blink183) -

Thank you for the kind words. You're not so bad yourself. The seats look great in your truck and certainly open up the inside quite a bit. The drilling and mounting for the shifter console was NOTHING compared to those rear seat holes! I'm glad that I could assist with the install and I learned a little something about the differences in the trucks. Knowledge is always good.

You should show a before and after pick. Very Nice -
Old Aug 21, 2006 | 03:59 AM
  #102  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
All -

My Comcast cable has been down since Friday. I managed to get the site unblocked from work so I can still keep you updated. Just be sure to check back here in the AM!

Thanks to everyone!
Old Aug 21, 2006 | 11:06 AM
  #103  
Blink 183's Avatar
Registered User
 
Joined: Aug 2006
Posts: 30
Likes: 0
From: Andover, New Jersey
I really hate to be asking this, but what's the status of the engine, and will it fit in my truck? Had a little mishap on the way home. Gotta love AAA though. Thanks.
Old Aug 21, 2006 | 11:50 AM
  #104  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
Originally Posted by Blink 183
I really hate to be asking this, but what's the status of the engine, and will it fit in my truck? Had a little mishap on the way home. Gotta love AAA though. Thanks.
What happened?

The engine is still installed and runs well.
I was selling as a package deal with the 5spd and t-case but I will sell it seperately if you need it.

Will it fit in your truck? You do have a 3.0 6cyl right?
Old Aug 21, 2006 | 01:18 PM
  #105  
Blink 183's Avatar
Registered User
 
Joined: Aug 2006
Posts: 30
Likes: 0
From: Andover, New Jersey
About 40 miles east of you, the engine first started sounding like it had bad gas, and then like a box full of hammers. It started losing oil pressure, and I pulled over and had it towed. It was dripping fluid, but I didn't climb undeneath to see where it was coming from. Sounds like it may have broken a rod. I'm having it looked at tommorrow, but may need that engine. I'll get back to you as soon as I know better. I have a V-6, and I think its the 3.0. Depending on the price, I might take the entire package or just the engine. Should know by tomorrow. What a pain in the arse.
Old Aug 22, 2006 | 04:34 PM
  #106  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
I'm back in action at home and at work.

Driver's mirror went out.

I'm waiting an updated payment from Toyota Joe.

The black gauge surround is next to go out for 4x4Lamm- None of my boxes fit it
I'll have to stop on the way home and pick one up.

Sold the wheels and tires and clock

Thanks everyone!
Old Aug 22, 2006 | 04:36 PM
  #107  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
Blink 183 -

$500.00 for the package deal (Engine, Trans, T-case)

or

$300.00 for the engine
$200.00 for the trans
$150.00 for the T-case

BTW - I don't install engines or trans & T-cases ----- lol

I really hope that everything works out!
Old Aug 22, 2006 | 04:40 PM
  #108  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
Originally Posted by Ridge Runner
dogdenii,

Do you still have the ABS actuator pump? If so how much shipped to zip 97886. Let me know.

Thanks,
Doug
$50.00 + 8.20 to ship

$58.20 shipped
Old Aug 22, 2006 | 09:03 PM
  #109  
Blink 183's Avatar
Registered User
 
Joined: Aug 2006
Posts: 30
Likes: 0
From: Andover, New Jersey
The price(s) is/are definitely right, and despite your hospitality, I don't expect an engine installation. I didn't hear back yet. E-mail you tomorrow. Thanks.
Old Aug 25, 2006 | 12:26 PM
  #110  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
Originally Posted by Blink 183
The price(s) is/are definitely right, and despite your hospitality, I don't expect an engine installation. I didn't hear back yet. E-mail you tomorrow. Thanks.
I hope everything worked out for you. Something easy?
Old Aug 25, 2006 | 02:59 PM
  #111  
Blink 183's Avatar
Registered User
 
Joined: Aug 2006
Posts: 30
Likes: 0
From: Andover, New Jersey
Actually no, I need the engine. How does your schedule look for next weekend? Thanks.
Old Aug 27, 2006 | 05:16 AM
  #112  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
Originally Posted by Blink 183
Actually no, I need the engine. How does your schedule look for next weekend? Thanks.
Really? I thought for sure that it would have been something simple.

Next weekend looks ok except for Saturday morning. Give me a yell and let me know what you're thinking.
Old Aug 29, 2006 | 03:15 AM
  #113  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
First post updated. (Thank you to everyone)


Location: Lancaster, PA (17555)
kamannsj@gmail.com
__________________________________________________

V6 1" master cylinder and dual diaphram booster - $100.00 pair
3.0 V Engine with 200,000 miles HG done (must pick up) - $300.00
Power Sunroof - $100.00
Drivers Side Fender immaculate - $25.00
IFS Power Steering Box - $100.00 w/arm
Driver Power mirror - $25.00 SOLD
Pass Power Mirror - $25.00
CD/Radio/Tape - $20.00 (power button fixed)
Gauge Cluster w/Tach - $40.00 SOLD
Center Console less heater - $15.00 SOLD
Rear seat heater - $25.00
Running Boards (one end cap mount has hole) - $100.00 pair
Sun Visors - $10.00 pair
Front Seat Belts - $25.00 (SOLD) - Modesto, CA
Transmission and T-case 250.00 set
Entire front axle end-to-end 4.56 gears - $200.00
Dome Light - $5.00
Driveshafts - Front: 25.00____ Rear 50.00
Front bucket seats (tear in drivers "get in") $100.00 pair
Shifter console w/boots $25.00 SOLD
Clock - $20.00 SOLD
Calipers - $50.00 pair (SOLD) - Starr, SC
Glove Box - $15.00 SOLD
Drivers marker light $10.00
Steering Column plastic top/bottom $10.00 SOLD
Dash Pad w/no cracks - $30.00 Pending shipping price
Black Gauge Surround - $10.00 SOLD
Any leftover single dash piece $10.00
Front armrests w/window/door switches - $50.00 pair
Rear armrest w/window/door switches - $25.00 pair
Rear ABS control module - $50.00
Tires/Wheels - $200.00 tires 90% SOLD
Cruise control unit (under hood) - $100.00
Tilt/Cruise steering Column - $100.00
Rear Cargo Carpet - $20.00 SOLD


Prices do not include shipping. Shipping will be through USPS unless requested otherwise. I take all the parts off with care so please allow for removal. Also.... I have to take the part for a shipping quote so please be patient.

Thanks for looking
Old Aug 29, 2006 | 04:35 AM
  #114  
Blink 183's Avatar
Registered User
 
Joined: Aug 2006
Posts: 30
Likes: 0
From: Andover, New Jersey
I'm a definite with the engine, but it doesn't look like I'm going to be able to make it out this weekend. Please PM me with the correct spelling of your name and your address and I'll send you a deposit to hold it until I can make arrangements to pick it up. Thanks.
Old Aug 29, 2006 | 01:37 PM
  #115  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
Originally Posted by Blink 183
I'm a definite with the engine, but it doesn't look like I'm going to be able to make it out this weekend. Please PM me with the correct spelling of your name and your address and I'll send you a deposit to hold it until I can make arrangements to pick it up. Thanks.
Do you just want the engine?

The reason I ask is because a guy from upstate PA is looking for the bundle also.
Old Aug 29, 2006 | 06:15 PM
  #116  
Blink 183's Avatar
Registered User
 
Joined: Aug 2006
Posts: 30
Likes: 0
From: Andover, New Jersey
I absolutely need the engine. If I have to take the rest of the bundle, I'll do it to avoid losing the engine. Thanks.
Old Aug 29, 2006 | 11:44 PM
  #117  
Robinhood150's Avatar
Contributing Member
 
Joined: May 2002
Posts: 6,033
Likes: 3
From: Wandering around Phoenix
Originally Posted by dogdenii
Steve -

I'll pack and ship today - Thank you
Got the mirror. Thanks.
Old Aug 30, 2006 | 03:23 AM
  #118  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
Originally Posted by Blink 183
I absolutely need the engine. If I have to take the rest of the bundle, I'll do it to avoid losing the engine. Thanks.
I sent you the information that you asked for.

Talk to you soon.
Old Aug 30, 2006 | 03:23 AM
  #119  
dogdenii's Avatar
Thread Starter
Registered User
 
Joined: Dec 2003
Posts: 405
Likes: 0
From: 17555
Originally Posted by Robinhood150
Got the mirror. Thanks.
You're welcome but I owe you a few bucks. The flat rate boxes came in sooner then expected and YOU are the one that turned me on to them.

Thank you!

Last edited by dogdenii; Aug 30, 2006 at 03:49 AM.
Old Aug 30, 2006 | 02:31 PM
  #120  
toyotajoe35's Avatar
Registered User
 
Joined: Jan 2006
Posts: 34
Likes: 0
het were are my parts man?



All times are GMT -8. The time now is 11:04 PM.