Sorry. I'm recovering from back surgery and have been a little lax on keeping up. I've responded to some and I'll get a response out to others soon. I do have the seat release cable. I also have the leatherette shift boot, but I've promised it to someone else.

 

I just pulled one off my truck. I had a 1990 4runner and I know that the tow hook I have would have fit on that truck. So, I'm pretty sure it will, but cannot guarantee it. It is the same as the one off my 1993 pickup. It is the type that has a big hook in the front and small one in the rear. Make me an offer on it.

 

I do have a seat cable, but I need to pull it from the seat still. Is there only one cable on the bottom of the seat? They are already out of the truck.

 

Actually I believe it's multiple cables, there is one that releases the seat back, and another that releases the seat bottom from the tracks on both sides allowing the seat to slide forward when the lever is pulled up further.

Hope this helps..

And thanks for the parts.

 

Still got it?

 

I do have it. I think it is in okay shape and the other side is rusted. Let me try and get a picture of it this week.

 

Still have the front corner lamps? I'll also take the HVAC faceplate if it's still in good condition. Stay tuned for more parts as my brain unclogs.

 

I do have the window trim. I'm pretty sure the one on the driver's side is good and the other is rusted. I'll try and get some pictures. I'll also need to figure out how to pull it.

Chris

 

Let me know a comlete list of parts you need. I do have both front corner lamps and the heater face plate trim. I need to know if you have AC as I have one with the AC cut out and another with the AC not cut out. I do have a guy that wants the one without the ac cutout.

 

do you have greay sr5 door panels

 

do you have the window seals available? i need the ones that fit the doors with the small hatch window, if so please let me know price on thme shipped to bath pa 18014

thanks

 

I do have the door panels for $75 and shipping and I do have the window moldings, but I'm holding them for someone right now. He is going to let me know tomorrow if he wants them. Best to email me so I can send pictures.

 

Do you still have a radio & two door speakers for this truck. Someone snipped mine out so if you can leave some pigtails (wires) it would help!

Thanks,

MadJack in ME

 

I have the radio, but I don't think the tapedeck works. I have a radio out of a 1990 truck that is interchangable, but you will need the coin holder for underneath. I have the OEM speakers and pigtails for them, but the speakers I have are mounted in the dash not the doors.

 

Is your driver's seat in good shape? If so how much and how much shipping to 23113 (or let me know an estimate of packed weight and size and I'll get a quote).

Thanks!

 

i need a window washer bottle and motor, and were you saying that you did not want to let the sending unit go right now?

 

I do have a sending unit and a washer bottle. Make me an offer on them. Email me and I'lll get back to you.

Chris

 

i have an 88 4runner sr5 and i demolished the sunroof.
i just need the pop out piece
if you could email me iwould apprieciate it.

marchoward420@gmail.com

thanks
marc

 

I'm looking for the hard vacuum lines. Specifically the one in the front of the intake manifold and the one that is near the throttle body.

They need to be clear, so please verify that air can pass through them.

 

How much of the rear window do you have left? I'm looking for the side rails the window slides along on each edge, and also the channels that is mounted on the bottom of the window. If you have most all of it, I might be interested in the whole thing so I have a backup.

How is your whole tailgate? Is it rusted out?

Shannon
'88 Runner