Lower balljoints (attn: recent SAS-ers)
#1
Lower balljoints (attn: recent SAS-ers)
Hey guys,
If one of ya'll has the lower balljoints from an 86-95 IFS truck, please let me know. I recently bought a pair of uppers and I need the lowers.
Preferably a set that does not have a ton of miles on then. Mine are very worn out (220K miles plus lots of wheeling) and my steering is suffering because of it.
Shipping would be to 30040
Thanks!
If one of ya'll has the lower balljoints from an 86-95 IFS truck, please let me know. I recently bought a pair of uppers and I need the lowers.
Preferably a set that does not have a ton of miles on then. Mine are very worn out (220K miles plus lots of wheeling) and my steering is suffering because of it.
Shipping would be to 30040
Thanks!
#3
Well I'm pretty sure the balljoint condition can be checked by jacking up the wheel and cranking on it to see if there is play in it. If there's no play, I'd be willing to bet they're okay...
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthCent]: TX Third Gen UCA and LCA low miles Taco
KyleT
Axles - Suspensions - Tires - Wheels
1
Jul 21, 2015 07:54 PM
FS[NorAtl]: set of 4 ball joints. any torsion bar ifs 4wd
akaphilly
Axles - Suspensions - Tires - Wheels
0
Jul 9, 2015 02:27 PM



