First and second gen pickup blow out sale!
Mar 12, 2017 | 05:45 PM
#81
I didn't read the whole thread, but if you're willing to transport the trucks, I might be interested in as much as you can haul in one load. I'm located mid state Michigan, Midland would be close enough for shipping estimates. Bodies rust apart up here, so dinged up people don't care about, it's the rust that's the real killer. Just entertaining ideas atm, but if I did get them, 90%+ of the parts would get used or resold. I really need to get a 30ft trailer made so I can haul 2 trucks at once and stuff them with parts lol.
Mar 13, 2017 | 04:43 PM
#83
Registered User
Joined: Sep 2003
Posts: 59
Likes: 0
From: Kansas
do you have any IFS manual locking hubs? If so I would like a set. PM sent
Mar 15, 2017 | 03:12 PM
#84
Originally Posted by lylerich
ok sounds good Im pretty sure that they should have the same tail gate. I have been looking everywhere online and I haven't had any luck. My truck sat for 6 years with a buch of pine straw in it and well it did a pretty good number on the bed. Thankfully the sides of the bed didn't get much rust. The tailgate, bed, and one of the bottom side panels on the bed took the most damage.
Mar 15, 2017 | 03:13 PM
#85
Originally Posted by OBXPaul
Do you have a bed that will fit an '83 4x4? Have tailgate, bed and sides have lots of rust and have been looking with no luck. Thanks
Apr 3, 2017 | 07:47 PM
#90
Registered User
Joined: Sep 2016
Posts: 81
Likes: 0
From: East Central Missouri
Looking for a AC tensioner pulley and bracket.
Mine tightens with the smog pump, which I'm removing.
Mine tightens with the smog pump, which I'm removing.
Apr 4, 2017 | 05:30 PM
#92
Registered User
Joined: Sep 2016
Posts: 81
Likes: 0
From: East Central Missouri
Sorry about that.
1983 4x4 with 22R
1983 4x4 with 22R
Apr 8, 2017 | 10:11 AM
#93
Registered User
Joined: Apr 2017
Posts: 20
Likes: 2
Let me know if you have any of the following for a 79-83.
-22r intake hose that attaches to the air cleaner and body on the drivers side.
-brush guard for 1st gen pickup
-tan door panels in good condition (prefer delux interior)
-floor pan cuts
-Drivers rear mud flap (toyota) 4wd
-Rubber between frame and bed on passenger side
-OEM radio for 1st gen
-Other vintage offroad goodies
Im in McPherson KS, but may be willing to drive to you.
-22r intake hose that attaches to the air cleaner and body on the drivers side.
-brush guard for 1st gen pickup
-tan door panels in good condition (prefer delux interior)
-floor pan cuts
-Drivers rear mud flap (toyota) 4wd
-Rubber between frame and bed on passenger side
-OEM radio for 1st gen
-Other vintage offroad goodies
Im in McPherson KS, but may be willing to drive to you.
Last edited by chughes96; Apr 9, 2017 at 06:33 PM.
Apr 10, 2017 | 09:31 AM
#95
Originally Posted by chughes96
Let me know if you have any of the following for a 79-83.
-22r intake hose that attaches to the air cleaner and body on the drivers side.
-brush guard for 1st gen pickup
-tan door panels in good condition (prefer delux interior)
-floor pan cuts
-Drivers rear mud flap (toyota) 4wd
-Rubber between frame and bed on passenger side
-OEM radio for 1st gen
-Other vintage offroad goodies
Im in McPherson KS, but may be willing to drive to you.
-22r intake hose that attaches to the air cleaner and body on the drivers side.
-brush guard for 1st gen pickup
-tan door panels in good condition (prefer delux interior)
-floor pan cuts
-Drivers rear mud flap (toyota) 4wd
-Rubber between frame and bed on passenger side
-OEM radio for 1st gen
-Other vintage offroad goodies
Im in McPherson KS, but may be willing to drive to you.
Apr 11, 2017 | 04:58 AM
#96
Registered User
Joined: Sep 2016
Posts: 81
Likes: 0
From: East Central Missouri
Apr 15, 2017 | 04:48 PM
#98
Registered User
Joined: Feb 2016
Posts: 6
Likes: 0
Door panels and trim any good off of that 84 or 87?
i need two passenger and one driver.
and that chrome 4x4 grill
and the little plastic bed trim in front of the rear wheels.
and the "Toyota 4x4" cab emblems. I lost one
might like that brown dash pad too if you make a nice package deal
thanks bud
i need two passenger and one driver.
and that chrome 4x4 grill
and the little plastic bed trim in front of the rear wheels.
and the "Toyota 4x4" cab emblems. I lost one
might like that brown dash pad too if you make a nice package deal
thanks bud
Apr 21, 2017 | 05:42 PM
#99
Originally Posted by Tmkllr
Door panels and trim any good off of that 84 or 87?
i need two passenger and one driver.
and that chrome 4x4 grill
and the little plastic bed trim in front of the rear wheels.
and the "Toyota 4x4" cab emblems. I lost one
might like that brown dash pad too if you make a nice package deal
thanks bud
i need two passenger and one driver.
and that chrome 4x4 grill
and the little plastic bed trim in front of the rear wheels.
and the "Toyota 4x4" cab emblems. I lost one
might like that brown dash pad too if you make a nice package deal
thanks bud
Apr 26, 2017 | 06:11 PM
#100
Registered User
Joined: Nov 2016
Posts: 4
Likes: 0
From: NM/AZ
You happen to have a passenger side rear mudflap? How about an antenna assembly?
87 4Runner.
87 4Runner.
