Notices
The Classifieds GraveYard Where old classifieds threads go that are too good to let go

feeler: parting out an 84 4 runner w/ brand new 22r motor

Old Sep 27, 2007 | 11:23 PM
  #1  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
FS:84 4runner ready for build

i HAVE AN 84 4RUNNER that I bought as a project vehicle last year. I bought it and the IDIOT I bought it from lied to me .....long story. I brought it home and 2 days later the motor blew up. I took the motor out and sent it to a good friend of mine who rebuilt this motor from top to bottom.. I mean everything on it is new. It is now installed in the truck and I am having the stock aisian carb rebuilt right now. The trucks interior is stripped right now...I pulled the carpet out and the seats and I am going to rhino line the floors in it and put the seats back in. I also have already purchased trail gears 5" front and rear classic lift! New clutch ...Also have 1 set of gears and a locker. 5.29's and a lockrite. Yukon gears. The motor is a 22r completely rebuilt with a 261 crawler cam a pacesetter header and a flowmaster muffler. Engine has new plugs ,wires , distributor, starter, I mean everything is brand spankin new. I am going to go ahead and get her running and put the rhino liner in and put the interior back together and then I want to sell it. It hasn't been started yet so the motor is still fresh. I want to sell all of it together the truck the lift everything cause I got way in over my head with this and my wife is not too happy about it. I am asking $ 5000obo and trust me it's well worth it. The front lift kit is $1000 and the rear is $600 and i am not even adding for shipping and taxes that I spent! The motor rebuild was almost $2000 the gears and locker....... 84 toyota sr5 will be running and loaded to the gills with everything to make her traill ready. aLSO HAS BRAND NEW TIRES ON GER 31X10.50'S $5000OBO
[IMG][/IMG]
I WILL SELL IT WITHOUT THE TRAIL GEAR LIFT KITS AND GEARS AND LOCKER........


GIVE ME A CALL AND MAKE ME AN OFFER MY WIFE CAN'T REFUSE! I AM LOCATED IN ATHENS GA EMAIL PEEBLESMILES@YAHOO.COM OR CALL ANYTIME AT 706-713-1280

Last edited by NG Crawler; Sep 29, 2007 at 05:53 PM.
Old Sep 29, 2007 | 09:29 AM
  #2  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
Bump need it gone! Obo
Old Sep 30, 2007 | 05:05 PM
  #3  
hmmwv15's Avatar
Registered User
 
Joined: Sep 2006
Posts: 1,801
Likes: 0
From: Good 'ole Georgia
bump, got one of my 1/2 doors cut.
Old Sep 30, 2007 | 08:29 PM
  #4  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
Show me some pics!
Old Oct 2, 2007 | 08:51 AM
  #5  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
Bump for the day
Old Oct 3, 2007 | 03:11 PM
  #6  
thewjsand's Avatar
Registered User
 
Joined: Jul 2006
Posts: 241
Likes: 0
From: Minneapolis MN
Bump

If i had the flow it would be mine.
Old Oct 10, 2007 | 05:07 PM
  #7  
thewjsand's Avatar
Registered User
 
Joined: Jul 2006
Posts: 241
Likes: 0
From: Minneapolis MN
Bump. Post some more pictures. Or did you sell this local?
Old Nov 8, 2007 | 07:21 AM
  #8  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
Bump I still have this. Somehow! I will sell it with or without the supsension kits.
Let meknwo what you want to do
Old Nov 8, 2007 | 07:24 AM
  #9  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
bump make me some offers
Old Nov 8, 2007 | 07:26 AM
  #10  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
I got all the prices for all the parts and everything so you can see what a deal this is.
Remeber I have not added what I paid for sales tax or shippin or most of the parts I have listed. Most importanly I didnt even add the 4 runner in the cost. I am losing out a lot I know but just need the cash.

The Trail gear lift kit prices i am posting are without sale tax and shipping costs.
classic front: $1000
Classic rear: $600
Long sline drive shaft: $179
Yukon gears 5.29's: $135
yukon gear install kit: $87
Lockright Locker: $257
261 Crawler cam shaft from engine builder.com: $130
starter: $70

Next set of parts not sure of the price cause I didnt keep reciepts
New clutch
new fly wheel
new spark plugs
new spark plug wires
new distributor
new distributor cap
new tires
new water pump
new timing chain
New belts
new ignition module
just rebuilt carb
I paid shipping and sale tax for all of the above.
Engine block: $80
Engine rebuild: $1500
Engine install: $645
Old Nov 8, 2007 | 07:29 AM
  #11  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
Call or email me 706-713-1280
Peeblesmiles@yahoo.com
Old Nov 19, 2007 | 06:59 AM
  #12  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
will trade the lift kits for a 4x4 4 wheeler
Old Nov 20, 2007 | 06:27 AM
  #13  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
feeler: parting out an 84 4 runner w/ brand new 22r motor

1984 sr5 .....I am either going to sell it or part it out. 84 4runner grey exterior w/ grey interior.
brand new 22r motor everything on it is brand new. w/ a 261 crawler cam from engine builder.
radiator
new clutch
new fly wheel
new starter
the dash is grey w/ rpm guage and inclometer
hard top is grey and has all windows
tail gate and working rear window
hood
fenders
headlights
tail lights
corner lights
parking lights
factory leaf springs
front drives shaft
rear driveshaft

both axles solid front and solid rear
wheels and tires. the wheels are sftermarket
transfer case
tranny
steering wheel
rear seat
I have an extra set of glass for the front windows

If i get some interest in this part out then list what you want and sell it to you. If you live close enough you can come pick the parts yourself.
Old Nov 21, 2007 | 02:31 PM
  #14  
Bri85yota's Avatar
Registered User
 
Joined: Oct 2007
Posts: 13
Likes: 0
From: Sac CA
Post Interested in T case

how much for T case?
Old Nov 22, 2007 | 04:04 AM
  #15  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
make me some offers .....but not stupid ones. Please
Old Nov 22, 2007 | 04:08 AM
  #16  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
bump for turkey day
Old Nov 23, 2007 | 06:11 AM
  #17  
toyotaman11's Avatar
Registered User
iTrader: (1)
 
Joined: Sep 2007
Posts: 652
Likes: 0
From: goshen ,ind
how much for the inclomiter ?
Old Nov 23, 2007 | 06:57 AM
  #18  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
I will only sell the parts in bigger sizes. The inclometer would be sold as the whole dash. Th dash is in excelent shape.
Old Nov 23, 2007 | 06:59 AM
  #19  
NG Crawler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 398
Likes: 0
From: Athens,Ga
I would sell like so:
t case
tranny
motor
axles
tires and wheels
both doors together
dash
hood
hard top
back seat
tail gate with the window and motor
fenders both
Old Nov 23, 2007 | 07:33 AM
  #20  
'884Runner's Avatar
Registered User
 
Joined: Nov 2007
Posts: 206
Likes: 0
From: GA
What would the whole truck sell for?

Thread Tools
Search this Thread

All times are GMT -8. The time now is 01:17 AM.