3.4 parts
Aug 14, 2006 | 11:17 AM
#21
Registered User
Joined: Dec 2003
Posts: 52
Likes: 0
From: Minneapolis, MN
Do you have low mileage coil packs? If so, what will you sell a set of 3 for?
Thanks!
Thanks!
Aug 16, 2006 | 09:29 PM
#22
Registered User
Joined: Aug 2006
Posts: 5
Likes: 0
do you have the bracket that holds the throttle cable? The bracket is right next to the diagnoistic plug on the driver side?
Aug 17, 2006 | 10:28 AM
#23
Contributing Member
Joined: Jul 2004
Posts: 203
Likes: 0
From: Kildeer, IL
do you have the throttle cable / kick down cable bracket that mounts to the intake manifold just prior to the throttle body?
my model is a 99 3.4L... I know that the 2000s did not have provisions for the kick down cable.
Thanks!
my model is a 99 3.4L... I know that the 2000s did not have provisions for the kick down cable.
Thanks!
Aug 17, 2006 | 10:42 AM
#24
Banned
Joined: May 2006
Posts: 0
Likes: 0
how much for a throttle body??
Aug 17, 2006 | 01:15 PM
#25
Contributing Member
Joined: Jul 2004
Posts: 203
Likes: 0
From: Kildeer, IL
Originally Posted by terrytcl
do you have the throttle cable / kick down cable bracket that mounts to the intake manifold just prior to the throttle body?
my model is a 99 3.4L... I know that the 2000s did not have provisions for the kick down cable.
Thanks!
my model is a 99 3.4L... I know that the 2000s did not have provisions for the kick down cable.
Thanks!
paid for!
thanks!
Aug 17, 2006 | 03:02 PM
#26
Thread Starter
Registered User
Joined: Apr 2004
Posts: 162
Likes: 0
From: Chesapeake Virginia
Please make offers on what you need and I will get back with everyone.
Aug 17, 2006 | 09:00 PM
#27
Registered User
Joined: Jun 2006
Posts: 626
Likes: 1
From: Hermiston, OR
sent you the $$ for the power steering brackets.
Aug 18, 2006 | 02:59 AM
#28
Thread Starter
Registered User
Joined: Apr 2004
Posts: 162
Likes: 0
From: Chesapeake Virginia
shipping today
Aug 23, 2006 | 08:51 PM
#29
Registered User
Joined: Jun 2006
Posts: 626
Likes: 1
From: Hermiston, OR
you have a tracking number on those brakets??
Aug 24, 2006 | 07:52 PM
#30
Registered User
Joined: Aug 2006
Posts: 12
Likes: 0
Do you have an ecu and wire harness for a 5 spd 3.4?
Doing a conversion into a 94 with a 5 spd.
Doing a conversion into a 94 with a 5 spd.
Aug 25, 2006 | 03:45 AM
#31
Thread Starter
Registered User
Joined: Apr 2004
Posts: 162
Likes: 0
From: Chesapeake Virginia
I have a 5spd harness and can prepare it for a 94. I will need to know all specs on your vehicle.
Aug 25, 2006 | 05:15 PM
#32
Registered User
Joined: Aug 2006
Posts: 12
Likes: 0
Do you have the computer too! I was told today that unless you have the computer # that wire harness came from there is no way to match another computer!??
Aug 25, 2006 | 07:09 PM
#33
Registered User
Joined: Jun 2006
Posts: 626
Likes: 1
From: Hermiston, OR
then how would the auto wreckers know which computer to sell you. all they ask is model 4x4 auto or manual and year
If you are doing a swap and going to have a conversion harness made then it might be better to have kustomkaos send you everything and make your conversion harness. cause thats a PITA
remember you need the evap canister and connected vsv's as well.
this swap will nickel and dime you to death if you let it.
If you are doing a swap and going to have a conversion harness made then it might be better to have kustomkaos send you everything and make your conversion harness. cause thats a PITA
remember you need the evap canister and connected vsv's as well.
this swap will nickel and dime you to death if you let it.
Last edited by thefallman; Aug 26, 2006 at 06:50 PM.
Aug 27, 2006 | 02:08 PM
#34
Registered User
Joined: Jun 2004
Posts: 6
Likes: 0
From: Philly Burbs 19475
Do you have an auto trans that will fit an 04 3.4 4x4 tacoma? How many miles? how much? Best to email me: glassdr@comcast.net
Last edited by glassdoc; Aug 27, 2006 at 02:09 PM.
Aug 27, 2006 | 02:38 PM
#35
Thread Starter
Registered User
Joined: Apr 2004
Posts: 162
Likes: 0
From: Chesapeake Virginia
Sorry no tranny.
Aug 29, 2006 | 08:20 PM
#36
Registered User
Joined: Aug 2006
Posts: 9
Likes: 0
how much for right side head with intake cam, shipped to 49408? and for the pair with cams shipped also. thanks
Aug 30, 2006 | 03:32 AM
#37
Thread Starter
Registered User
Joined: Apr 2004
Posts: 162
Likes: 0
From: Chesapeake Virginia
I really do not want to part the complete long blocks I have left, but will do $300 shipped for a pair of complete heads. You have a sludge motor?
Last edited by kustomkhaos; Aug 30, 2006 at 03:33 AM.
Aug 30, 2006 | 11:31 AM
#38
Registered User
Joined: Jun 2003
Posts: 40
Likes: 0
From: Houston
Air box to 77069?
Aug 30, 2006 | 12:36 PM
#39
Thread Starter
Registered User
Joined: Apr 2004
Posts: 162
Likes: 0
From: Chesapeake Virginia
All air box's are gone.
Aug 31, 2006 | 06:16 PM
#40
Registered User
Joined: Apr 2003
Posts: 1,009
Likes: 0
From: Arizona
what year 3.4 you're parting out?
