Notices
The Classifieds GraveYard Where old classifieds threads go that are too good to let go

2000 4runner 3.4 auto part out, AR

Thread Tools
 
Search this Thread
 
Old Jun 1, 2012 | 07:02 AM
  #21  
Killer B's Avatar
Registered User
 
Joined: Aug 2011
Posts: 148
Likes: 0
scooped hood by chance? I see it s pretty F'd up but would you sell the insert (plastic piece in the scoop hole/opening)
Old Jun 1, 2012 | 05:23 PM
  #22  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
Originally Posted by Killer B
scooped hood by chance? I see it s pretty F'd up but would you sell the insert (plastic piece in the scoop hole/opening)

It doesnt have a hood scoop. hood is messed up bad.
Old Jun 3, 2012 | 09:36 AM
  #23  
Daneums's Avatar
Registered User
 
Joined: Jan 2012
Posts: 74
Likes: 0
Are both the rear fender flares in good shape? 75707
Old Jun 3, 2012 | 09:37 AM
  #24  
Daneums's Avatar
Registered User
 
Joined: Jan 2012
Posts: 74
Likes: 0
And if you have the front ones, but I'm guessing not
Old Jun 3, 2012 | 06:47 PM
  #25  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
Only one still good is the driver side rear. Tell me if you want it I can send a picture and get a price.
Old Jun 3, 2012 | 07:49 PM
  #26  
Daneums's Avatar
Registered User
 
Joined: Jan 2012
Posts: 74
Likes: 0
Nah I need a full set or at least two that match. What about rear head rests? if theyre the same as a 97
Old Jun 5, 2012 | 04:30 AM
  #27  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
it looked like the headrest weren't in good shape either. Anything else. I'll eventually have something you need.
Old Jun 7, 2012 | 03:19 AM
  #28  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
Bump.
Old Jun 8, 2012 | 04:04 PM
  #29  
KSTacoma's Avatar
Registered User
 
Joined: Jan 2004
Posts: 96
Likes: 0
From: Maryland
I'll take the powersteering pump if it is leak free. I need it complete with the pulley, resevoir and cap.

I'll also take the fuel pump if the price is right.

Let me know your price for both shipped to 21742.
Here is the going prices at the salvage yards around me:
http://www.crazyraysautoparts.com/price.htm

I won't waste your time and can paypal you immediately.
Thanks man!

Jamie
Old Jun 8, 2012 | 05:54 PM
  #30  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
I dont have the power steering pump but let me check on that fuel. I can let you know tomorrow.
Old Jun 11, 2012 | 04:18 AM
  #31  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
Originally Posted by KSTacoma
I'll take the powersteering pump if it is leak free. I need it complete with the pulley, resevoir and cap.

I'll also take the fuel pump if the price is right.

Let me know your price for both shipped to 21742.
Here is the going prices at the salvage yards around me:
http://www.crazyraysautoparts.com/price.htm

I won't waste your time and can paypal you immediately.
Thanks man!

Jamie
Sry I dont have that fuel pump either.
Old Jun 13, 2012 | 04:14 AM
  #32  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
bump.
Old Jun 21, 2012 | 07:21 PM
  #33  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
pm's answered
Old Jun 24, 2012 | 06:59 AM
  #34  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
hey Vargntucson have you gotten any of my pm's. Let me know if you want those control arms.
Old Jun 24, 2012 | 03:07 PM
  #35  
fengine8's Avatar
Registered User
 
Joined: Apr 2010
Posts: 12
Likes: 0
From: Columbus, Ohio
Is the damage only on the front of the vehicle? Are all four doors in ok condition? Do you still have the extruded aluminum pieces of the metal that are used in the factory roof rack rails to hold the large cross bars to the rails?
Old Jun 25, 2012 | 04:34 AM
  #36  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
Originally Posted by fengine8
Is the damage only on the front of the vehicle? Are all four doors in ok condition? Do you still have the extruded aluminum pieces of the metal that are used in the factory roof rack rails to hold the large cross bars to the rails?
Damage is all down passenger side. Just the drive side doors are ok. I have one of the metal rail pieces. That's all that is good
Old Jul 10, 2012 | 07:14 AM
  #37  
mschein1's Avatar
Registered User
 
Joined: May 2010
Posts: 50
Likes: 0
skid plate?
Old Jul 12, 2012 | 11:58 PM
  #38  
JBurt's Avatar
Registered User
15 Year Member
 
Joined: Jan 2010
Posts: 953
Likes: 21
From: Imperial County CA
Looks like it's toast but any chance the antenna mast survived?
Old Jul 16, 2012 | 02:54 AM
  #39  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
Originally Posted by JBurt
Looks like it's toast but any chance the antenna mast survived?
It sure didn't. That got all smashed up.
Old Jul 16, 2012 | 02:55 AM
  #40  
millerwayne's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 86
Likes: 0
From: Arkadelphia, AR
Originally Posted by mschein1
skid plate?
Sry no skid plate. Already sold.



All times are GMT -8. The time now is 05:59 PM.