1987 4runner parting out. Entire Vehicle. Lots of parts
Jan 12, 2010 | 04:23 AM
#41
Registered User
Joined: Jan 2006
Posts: 684
Likes: 2
From: North Georgia
... Wiper Arms for the front, if they're clean ...
Jan 12, 2010 | 07:18 AM
#42
Registered User
Joined: Jan 2010
Posts: 11
Likes: 0
From: Katy/Houston, Texas
How are the sliding glass window frames in the removable top? Rust free?
Last edited by cegusman; Jan 12, 2010 at 07:23 AM.
Jan 15, 2010 | 07:39 PM
#43
Registered User
Joined: Dec 2008
Posts: 29
Likes: 0
From: oklahoma
is the gauge cluster still availible? is it sr5?
Jan 27, 2010 | 10:23 AM
#44
Thread Starter
Registered User
Joined: Jan 2008
Posts: 940
Likes: 0
From: Sun Valley, CA
Still got lots of parts. Let me know what you need.
Most of the interior is gone. Still have entire drivetrain. Engine and transmission
Most of the interior is gone. Still have entire drivetrain. Engine and transmission
Jan 27, 2010 | 09:24 PM
#45
Registered User
Joined: Jan 2010
Posts: 38
Likes: 0
gauges
do you have the gauges with a tach? thanks, Jim
Jan 28, 2010 | 07:07 AM
#46
Registered User
Joined: Jun 2006
Posts: 2,711
Likes: 4
From: San Diego
Rear window switch shipped to 92009
thanks
thanks
Jan 29, 2010 | 09:16 AM
#47
Registered User
Joined: Feb 2007
Posts: 527
Likes: 0
From: Las Vegas, NV
).If you have them they would need to be shipped to 89129. How much?
This is what my A/C "bezel" looks like. Does your match?
Last edited by Joe's Toy; Jan 29, 2010 at 09:18 AM.
Feb 1, 2010 | 01:29 PM
#48
Registered User
Joined: Feb 2010
Posts: 1
Likes: 0
Antenna
How much ( if you still have it) for the antenna all of the parts (internal and external). My husband is searching for one with no luck. Ship to 21060 thanks a bunch for the concern
Feb 1, 2010 | 01:32 PM
#49
Registered User
Joined: Jun 2006
Posts: 2,711
Likes: 4
From: San Diego
Alternator brackets and plug shipped to 92009
Feb 1, 2010 | 04:06 PM
#51
Registered User
Joined: May 2007
Posts: 350
Likes: 0
From: Milan, IL
Hello, I am in need of two pieces for my rear window. My regulator is there and works and my back glass is ok. What I need is the two pieces that attach the regulator arms to the bottom of the rear glass.
Also drivers side floor trim that holds the carpet down under the door if you have it. Shipped to 61264. Thanks.
Also drivers side floor trim that holds the carpet down under the door if you have it. Shipped to 61264. Thanks.
Feb 2, 2010 | 05:06 PM
#52
Registered User
Joined: Oct 2009
Posts: 2
Likes: 0
do you still have brown dash and does it have any cracks
Feb 2, 2010 | 06:50 PM
#53
Registered User
Joined: Jan 2010
Posts: 38
Likes: 0
i dont have anything for sale. somehow im getting somebody elses inquires
Feb 5, 2010 | 11:36 AM
#54
Registered User
Joined: Jan 2010
Posts: 22
Likes: 0
From: near Portland, OR
Do you still have the center arm rest? I just need the lid to 98672.
This might be more hassle than it's worth, but how does the carpet kit look?
This might be more hassle than it's worth, but how does the carpet kit look?
Feb 5, 2010 | 12:37 PM
#55
Registered User
Joined: Jan 2010
Posts: 38
Likes: 0
im not the one that has anything for sale
Feb 5, 2010 | 01:17 PM
#56
Registered User
Joined: Jan 2010
Posts: 22
Likes: 0
From: near Portland, OR
joltin_jim11....we are not asking you. you posted on this thread which means you are now subscribed to this thread so you get an alert for any new post
Feb 7, 2010 | 05:51 PM
#57
Thread Starter
Registered User
Joined: Jan 2008
Posts: 940
Likes: 0
From: Sun Valley, CA
Center counsole has been sold and carpet kit is gone
Feb 8, 2010 | 10:34 AM
#58
Registered User
Joined: Dec 2009
Posts: 754
Likes: 0
From: Pearland, Tx
is it the 3vze motor. i need the fuel injector wires preferably just where they plug in not the whole harness. For ease of shipping
Feb 8, 2010 | 06:58 PM
#59
Thread Starter
Registered User
Joined: Jan 2008
Posts: 940
Likes: 0
From: Sun Valley, CA
Feb 10, 2010 | 05:13 AM
#60
Are you able to cut body parts? I need a part of the inner fender on the passenger side. You'll have to cut the part out because I believe the whole thing is spot welded in some places. Anyways, if you're game for it let me know and I'll send you a pic of the area that I need. The metal under my battery tray is all rusted out and I need another part to make a patch.
