When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Badlander - if the driver's floor board is good, would you consider cutting a piece for me? I can get you a pic and some measurements on size of the piece I need, but I've got a hole in mine right in the curve of the floor behind the brake.
sure, send me some measurements. There is some rust in certain areas, but I can check to make sure
Any chance of having the front OEM bumper (3 piece) and bumper stays (mounting brackets)? I really just need the brackets for 3 piece bumper.
Also interested in the mechanical portion of the cruise - the part that mounts on the drivers side and connects the accelerator and actuator together - cables for that also.
Any chance of having the front OEM bumper (3 piece) and bumper stays (mounting brackets)? I really just need the brackets for 3 piece bumper.
Also interested in the mechanical portion of the cruise - the part that mounts on the drivers side and connects the accelerator and actuator together - cables for that also.
I have a smittybilt bumper, so it doesn't have the OEM brackets. The cruise didn't hold at all. I'm not sure what the problem was, but something isn't working right.
Looking to replace all interior panels, center console, dash assembly, carpets, headliner, rear seats, tail gate motor. got anything left?
Door panels are in an above photo. I have the back seat panels too, I can get you a picture of those. PM me your number and I can text you some. The headliner is in good condition - it has a sunroof though, if that matters to you. Tailgate motor is gone. The dashpad and inclinometer are on ebay as one unit. I have the rest of the dash though. Its all in good condition except the radio trim is cut. The center console is for rear heat. The armrest pad for it is toast.
May 28, 2016 | 06:46 AM
