do you have any door panels or window regulators

thanks

 

Sweet! Mostly interested in the fenders and corner lights, but like always I'll bring over extra cash and I'm sure (100% sure) I'll leave with more then I planned. I got 3 yotas, so I'll surely load up a bunch of junk in the truck to take home with me.

Pm where and when is good for you, maybe this weekend? I'm trying to get my one rig looking good as soon as possible. So let's make this happen! Thanks pal

 

curious if the AFM was sold with the engine??

 

I've got the EFI from a couple engines. Its around here somewhere. Hit me with text/call 215 850 six three three one. I'm not on here much ... thanks! Just noticed your sig: I used to have a '95 240, Skyline R32 rims on it ... blah.

 

PMed ya. Sorry for the slow reply, I'm just not on here much. Selling off a lot of stuff. I have only one grille left, have to check the inventory on the corner lights, sold the chrome ones. I've got fenders (they're trail-truck grade) two hoods too ... lots of interior stuff ... I'm starting to build a pile of miscellaneous stuff I'm going to give away or trash. Just tired of looking at some of it!

 

did business with TMDedtruks today. Very friendly guy and highly recommended, you cant go wrong with this guy!

hehe, heres my parts haul






P.S i do infact need a mudflap, just a drivers side. I'll catch up with you next time i see ya, i'll try to get a list together

 

Thanks for the bump 85gijunk4x4! Glad to see the parts go to a good home. Let me know when you're going to do that trans swap!

 

Got some miscellaneous Toy mini parts that I haven't listed. 1986 (or so) door panels, arm rests, "stuff".

OK resized 'em down and they're STILL not small enough. Try again ... OK, that's awful, try again (Admins, can't we get attachments up in the 150KB range? Photo editing puts it squarely above or way below 48.8KB) ... third try still didn't work. OK, well, ...

 

i could most definatly use all those parts pictured above for my 85...i kinda need doors first, since the door is bent way to badly to get that panel to be even close to mating up....

i'm debating on wether to jump on it or not, since i have about all the exterior parts i need. Let me know what kind of price range your thinking and i'll make a desicion.

i think i already know the answer to this, but would you consider trades for other toy parts?

 

how much for the arm rests

 

Well, I found a set of door panels in grey for my red truck and seller wanted 75, which I thought was crazy, so I passed. My tan panels, arm rests, hardware, and as usual throw something in for say ... $50? Not cheap but ... Trades? Are you kiddin'? You know how much jun.... uh, parts, yeah PARTS I have! But you're going to laugh: I no sooner sell you all my stock bumpers and ... D'oh! One of those FJ40 chassis got away from us a little while we were dragging it out front to pull the motor, and it punched the little red truck in the nose a couple times. Sigh ... Oh, but it gets better! Those rear mud flaps were the ones off my red truck, which I didn't intend to sell! Ha, ha, no worries, there are probably more in my stash.

 

Guys, I gotta be honest, shipping is a royal pain in the tohunga (pronounced "toe-hoong-ah" for those of you not versed in the Futungha language) for me. I thought I had an assistant to help out, uh, wrong. His GF actually helped me a little today, but I'm behind in getting quotes out to folks and that kinda bums me. So, to answer your question, I want to let the arm rests go with the door panels. That way, if I gotta ship, it is at least worth my time/effort. Just sayin'. Thanks!

 

i'll tell ya what, all i wanted was the bracketry and whatnot, not so much the bumper itself. I actually just got done stripping one chrome bumper down and used the brackets and metal air dam thingy on my truck, so your welcome to the bumper if you want it.

and my phone died erlier this week. should get a replacement tomorrow, so i've been wanting to shoot you a text. But since i'm here i figured i'd just ask.

happen to have the peices that sit on the rear axle, kind of in the drum area that actuate the parking brake? All of mine are seized.

 

Thanks man, I might take you up on the bumper. I can pull the old one out/patch it up, or build a new one (like I have time for any of that).

I have the brake parts but you can fix the seized stuff too. Done it a couple times already. The key is to get it completely apart and cleaned, because the dissimilar metals (aluminum and steel) react. Once it is apart, you anti-seize it good, reassemble, and that's usually the end of the problem. Can't say I've ever had them seize up again once I've done that.

Hit me with a text when you get the new phone. Looking forward to seeing your projects! And I'm seriously jealous that you have the "official" ugliest truck on the forum! I gotta do something about that!

 

i need all the windsheild trim for my 85 pickup in md. do you have any thats good, thanks mick

 

All the trim is good. Not sure how to get it off there without bending it, etc. You know?

 

i think it just snaps off pry gently, how much do you want and shipping to 21532 frostburg md. thanks mick

 

Front bumper still available? Shiped to 05855?

 

do you still have windshield trim for sale if so how much and shipping to 21532 thanks , mick

 

All front bumpers gone man, sorry.