pictures speak louder the words....
what are the specs of the truck is it bone stock?
plans for use?
is it a street queen? (no offense)
all the trucks that we build are set for off road in mind.
a 6 inch bl isnt gonna help out in any way shape or form.
i myself would have lifted the truck a few inch's over a 6 inch body lift to gain the extra space needed,a body lift at 6 inch's is gonna sway alot .
after a few weeks of driving it around id like to see what the mount locations in the floor are gonna look like, whats the hood clearance like, did you use the stock mounts from the ome617 or make custom ones if so why not push the motor up, over a body lift?

 

You have misunderstood what I typed.
There was no lifting of anything, no suspension or body lifting, nothing!
The custom pan and sump cured the clearance issues with the front end.
We just want it to be a daily driven SUV. No muddin here!
Hood clearance is about 3 inches.
We used the stock Mercedes Benz mounts. But installed new mounting plates to the frame. This way the trans is in the stock location and gives the best alligment of the driveshafts. Pictures coming soon.

 

I am really interested in purchasing this plate. I have the W56 Transmission in My 1991 Toyota truck. How can I contact you. George

 

i too am interested in this swap. i think i saw your prototype build over on 4bt swaps and it sounds mean and looks sweet. how much for the adapter plate and the pilot bearing adapter?

 

yeah im interested in finding out how much the adapter plate, mounts, and pilot bearing adapter is because i can get one of these motors for next to nothing

 

I have a turbo diesel 617 with a lovecraft fuel setup to run available fuel out of one tank. I am super interested in the cost of your conversion kit by its self. Can I contact for info?

 

2nd that-really interested in the price of the adapter kit w/ no installation.

 

price for the kit alone is $1000+shipping contact me via pm
$500 up front, the balance owing to be paid upon shipment of the kit

 

did you ever find out if you guys would be offering the parts seperately? i am still interested in buying just the pilot bushing addapter. i found a motor for free and have the truck to put it in but have not had the time to measure up to get a machine shop to build the bushing.

 

price drop to $850 per kit

 

any news on selling components?

 

Do we have a phone number that we can reach this place at? I've emailed and PM'ed them to no avail, have a couple of questions before I drop almost a grand into this kit. I know a few other fellow toy owners that would probably be very interested too.

 

pm's have been replied to
sorry I'm not getting my notifications from the site for some reason

 

keeping an eye on this

 

I'm super interested in this kit... Riddle me this though, why would you need a 2'' BL if you sas it? isnt the BL there to help with clearance issues (lifting motor higher up) more info would be greatly appreciated

 

Bump, we want a OM617 diesel adapter for a W56 tranny!

 

the kit is only available for the w56 trans price is $850+shipping
any other info can be found in this thread please read the thread.
send any other questions you have along via pm to get a quicker reply

 

Hey, are you still selling these install kits? i sent you a pm about 2 weeks ago, still no reply... thanks, Josh

 

bump ttt

 

yes i am interested aswell.. Bump