I decided since my 22r blew up that I would do an efi swap. I have a couple of engines that have just recently been torn apart and I'm gonna have to use parts from 2 motors to make 1.

I have 1 that is bore'd .030 over and the crank is .020 undersized but with good cylinder walls.

The other one is bone stock across the board. But has 1 a .003 score down the bore (something musta got caught in between).

Will the stock crank from engine #2 be able to go into block 1 with just stock bearings? Or will the rods need to be re sized and other mess ups?