3.4 Swaps The 3.4 V6 Toyota engine

ok, i've looked into all swaps

Thread Tools
 
Search this Thread
 
Old Aug 8, 2008 | 08:39 AM
  #21  
syber_kowboy's Avatar
Registered User
 
Joined: Jul 2008
Posts: 143
Likes: 0
From: CA
Originally Posted by 76ANTHONY
SORRY I HAVENT REPLIED back in a while, caught up at work.
i live about 10 miles east of palm springs in palm desert, where are u?
and yes this is the only reason i will not or have not done the 3.4 swap yet, if im gonna have elec issues im going 4.0 1uzfe, heck i can weld up a motor mount or two and think of the power i would have, but then again there arent many people that have swapped the 3.0 for the 1uz with the same auto and 4x4....
im actually thinkin bout a jeep cherokee
Ha! I have 96 Cherokee sport I'll sell you cheap. The motor and trans are tight and the fenders have been professionally trimmed to allow for larger tires. It's got nice wheels and 31's on it right now. Needs some suspension parts. I sorta wore it out a little. Tends to rattle a lot. Plus it's only getting 13-14 mpg at best with the tires.
So I'm up north in the great zoo they call the Bay Area.
Reply
Old Aug 8, 2008 | 08:39 AM
  #22  
syber_kowboy's Avatar
Registered User
 
Joined: Jul 2008
Posts: 143
Likes: 0
From: CA
Originally Posted by RobD
If they're over 19, I'd be happy to help keep them warm back there.
Oh yeah they're of age !! BTW down here it's 18
Reply
Old Aug 8, 2008 | 08:43 AM
  #23  
syber_kowboy's Avatar
Registered User
 
Joined: Jul 2008
Posts: 143
Likes: 0
From: CA
Originally Posted by BAMF_CT2004
why not just use the 340h???
I'm still considering it. I heard back from the boys at Team Shift Point. Hoping to find out how they used a 340H without setting off the CEL code from the VSS #2. How's yours doing btw? Still having issues in low range?
Reply
Old Aug 8, 2008 | 09:46 AM
  #24  
Dan.3's Avatar
Registered User
15 Year Member
 
Joined: Nov 2006
Posts: 710
Likes: 0
From: Tinley Park, IL
Originally Posted by syber_kowboy
I'm still considering it. I heard back from the boys at Team Shift Point. Hoping to find out how they used a 340H without setting off the CEL code from the VSS #2. How's yours doing btw? Still having issues in low range?
Team shift point modified the 340h to house the 340f sensor inside the trans. Odds are you wont hear back from them. Whats the big deal about the cel?

Mine runs great other than most likely my selonoid issues.
Reply
Old Aug 8, 2008 | 03:29 PM
  #25  
RobD's Avatar
Registered User
 
Joined: Jun 2006
Posts: 2,243
Likes: 5
From: Calgary, AB
Originally Posted by syber_kowboy
Oh yeah they're of age !! BTW down here it's 18
Unfortunately, it's 14 here unless you're in a position of power or something equally dumb. I'll stick with 19 year olds...

Wait, even that's a bit creepy.
Reply
Old Aug 9, 2008 | 09:37 AM
  #26  
76ANTHONY's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 462
Likes: 0
Originally Posted by BAMF_CT2004
Team shift point modified the 340h to house the 340f sensor inside the trans. Odds are you wont hear back from them. Whats the big deal about the cel?

Mine runs great other than most likely my selonoid issues.
a cel will fail you on the smog test, thats why im thinking this really aint cali freindly if you get a cel.....
Reply
Old Aug 9, 2008 | 09:38 AM
  #27  
76ANTHONY's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 462
Likes: 0
Originally Posted by syber_kowboy
Ha! I have 96 Cherokee sport I'll sell you cheap. The motor and trans are tight and the fenders have been professionally trimmed to allow for larger tires. It's got nice wheels and 31's on it right now. Needs some suspension parts. I sorta wore it out a little. Tends to rattle a lot. Plus it's only getting 13-14 mpg at best with the tires.
So I'm up north in the great zoo they call the Bay Area.
reallllly, how cheap? my inlaws live in melpitas so its within a stones throw from you i suppose. will it make it to palm springs?
Reply
Old Aug 12, 2008 | 03:06 PM
  #28  
syber_kowboy's Avatar
Registered User
 
Joined: Jul 2008
Posts: 143
Likes: 0
From: CA
Originally Posted by RobD
Unfortunately, it's 14 here unless you're in a position of power or something equally dumb. I'll stick with 19 year olds...

Wait, even that's a bit creepy.
LMFAO! Especially considering that you have daughters right!

Oh well we're still guys!
Reply
Old Aug 12, 2008 | 03:09 PM
  #29  
syber_kowboy's Avatar
Registered User
 
Joined: Jul 2008
Posts: 143
Likes: 0
From: CA
Originally Posted by 76ANTHONY
reallllly, how cheap? my inlaws live in melpitas so its within a stones throw from you i suppose. will it make it to palm springs?
Oh yeah the thing is tight. It just needs some freaking bushings and a good set of ball joints. The biggest issue with it is that it's TEAL I mean freaking ugly ass teal. Other then that it's a good rig. I just don't like it. Plus a buddy gave it to me all messed up and I brought back to life and now he's dying of cancer and I don't like the reminder. A really close friend is asking me about too so I'd have to check with him but if he's too busy or broke we can talk about it.
Reply
Old Aug 13, 2008 | 09:12 AM
  #30  
76ANTHONY's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 462
Likes: 0
Originally Posted by syber_kowboy
Oh yeah the thing is tight. It just needs some freaking bushings and a good set of ball joints. The biggest issue with it is that it's TEAL I mean freaking ugly ass teal. Other then that it's a good rig. I just don't like it. Plus a buddy gave it to me all messed up and I brought back to life and now he's dying of cancer and I don't like the reminder. A really close friend is asking me about too so I'd have to check with him but if he's too busy or broke we can talk about it.
pm me a price on this, i have a freind looking to build one and he wants to paint it flat black, so this one may be perfect for him....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RA8225
Looking For A Mechanic/Fabricator/Shop
3
Aug 12, 2019 01:31 PM
irish_tyrant
Items Wanted
2
Jul 6, 2015 11:22 AM
Valvoman
86-95 Trucks & 4Runners
3
Jun 28, 2015 02:45 PM
Chooch
86-95 Trucks & 4Runners
9
Jun 19, 2015 03:05 PM




All times are GMT -8. The time now is 08:47 PM.