3.4 Swaps The 3.4 V6 Toyota engine

2001 5vz-fe Swap into a 93 4Runner

Thread Tools
 
Search this Thread
 
Old 09-23-2010, 05:52 PM
  #221  
Contributing Member
Thread Starter
 
yodathespian87's Avatar
 
Join Date: Apr 2008
Location: Colorado Springs, Colorado
Posts: 654
Likes: 0
Received 1 Like on 1 Post
Ha ha ha. No. Yes Black Ops comes out soon but this is running. Been working lots of OT, was in a community theatre project, oh and football season has started. I have got it to start. But have yet to let it run. Have to find a way to get the truck to the exhaust shop. (Which means use of a friends truck and a Uhaul trailer) After that its reassembly of the dash, AC/ heating, and trouble shooting. I will get some pics if I make it out to the garage this weekend.
Old 10-01-2010, 08:39 AM
  #222  
Contributing Member
Thread Starter
 
yodathespian87's Avatar
 
Join Date: Apr 2008
Location: Colorado Springs, Colorado
Posts: 654
Likes: 0
Received 1 Like on 1 Post
So I'm having the tow truck pick it up today for the exhaust work. When I was out there putting on the top half of the dash together. I noticed (when it was running) that my tachometer wasn't working. I soldered the resistor in on the board. What else gets thats going?

Last edited by yodathespian87; 10-06-2010 at 06:51 AM.
Old 10-01-2010, 12:08 PM
  #223  
Registered User
 
ColoradoToy91's Avatar
 
Join Date: Apr 2008
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by yodathespian87
So I'm having the tow truck pikc it up today for the exhaust work. When I was out there putting on the top half of the dash together. I noticed (when it was running) that my tachometer wasn't working. I soldered the resistor in on the board. What else gets thats going?
Tach wire (Black I believe) from the dash harness to the tach wire in the engine harness (black or black/white i believe). Other than that the three screws on the back of the tach, the tach is broken, or it was mis-wired
Old 10-06-2010, 06:55 AM
  #224  
Contributing Member
Thread Starter
 
yodathespian87's Avatar
 
Join Date: Apr 2008
Location: Colorado Springs, Colorado
Posts: 654
Likes: 0
Received 1 Like on 1 Post
Well got the truck back and the exhaust looks great and sounds pretty good as well. Driving home she was working pretty good, she was hesitant, but I on't have the sensors hooked up yet. Then Then turning onto a very big intercection here in the springs she dies, and refuses to start again. Pretty sure a wire came loose. Drug her home now gotta go over all the wiring again and clean it up a little. I tried to upload some pictures but it wouldn't let me upload any. Got lots to show.
Old 10-09-2010, 12:05 PM
  #225  
Contributing Member
Thread Starter
 
yodathespian87's Avatar
 
Join Date: Apr 2008
Location: Colorado Springs, Colorado
Posts: 654
Likes: 0
Received 1 Like on 1 Post
Ok, got her running again, jumper wire had a bad connection. Still needs some fine tuning but nice to know I'm back on track.
Old 02-28-2011, 10:57 PM
  #226  
Registered User
 
tirogers's Avatar
 
Join Date: Oct 2009
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Update

Any up dates on this old thread? I just read the whole freakin thing (again) and am definitely going to refer back to it in a few days! Any of the contributiters of this thread still subscribe? I fell I need very similar help soon, but in a not so long drawn out fashion lol. Glad to see you got it running!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
icentropy
86-95 Trucks & 4Runners
22
09-16-2020 02:47 PM
toyotamonster
3.4 Swaps
7
04-16-2020 06:02 PM
mskalmus
86-95 Trucks & 4Runners
9
05-28-2017 07:51 AM
HRDC0R19
86-95 Trucks & 4Runners
3
07-05-2015 06:43 PM



Quick Reply: 2001 5vz-fe Swap into a 93 4Runner



All times are GMT -8. The time now is 07:31 PM.