1997 Rear Bumper replacement
Mar 29, 2005 | 08:33 PM
#1
Thread Starter
Registered User
Joined: Mar 2005
Posts: 2
Likes: 0
From: raleigh, nc
1997 Rear Bumper replacement
I'm new to this forum, I just bought a 1997 SR5. The previous owner managed to punch a hole in the rear bumper that has begun to rust. I have found the center piece of the bumper online for $87-110. My question is: How do I go about removing the center piece of the bumper to replace it? Any help is greatly appreciated.
Mar 29, 2005 | 08:49 PM
#2
Registered User
Joined: Apr 2003
Posts: 880
Likes: 0
From: Greenleaf, Ore
Factory Service Manual....Haynes....or Chilton manual......
you'll need PB blaster as well....
you'll need PB blaster as well....
Mar 30, 2005 | 03:26 AM
#3
Thread Starter
Registered User
Joined: Mar 2005
Posts: 2
Likes: 0
From: raleigh, nc
Sorry, a PB blaster is....? THanks for the reply man.
Mar 30, 2005 | 03:36 AM
#4
Registered User
Joined: Apr 2003
Posts: 880
Likes: 0
From: Greenleaf, Ore
Parts Blaster....it's a solvent...and a veery good one...get to know....soak you bolts before trying to break them free and you'll save frustration and not break off bolts!
Good luck....removal of that should be pretty straight forward if you give it a look!
Good luck....removal of that should be pretty straight forward if you give it a look!
Thread
Thread Starter
Forum
Replies
Last Post
stagger_lee
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
6
Mar 29, 2016 06:27 PM
dirtrider0129
Buying & Selling Advice - Feeler/Gauging Interest
10
Jun 24, 2015 12:24 PM
Robinhood150
Off Road Trip Planning, Expeditions, Trips, & Events
3
Jul 9, 2002 07:54 AM
