SE4RJ3 May 11-14, 2006 at Tellico
05-10-2006, 05:34 PM
#1241
That sucka is a beast! 
I just got done w/ my "have to" stuff...now it is all gravy!
Post up pics at www.se4rj.com/gallery - register w/ a username and password and upload to the SE4RJ3 (2006) gallery. Thanks Mark!
I just got done w/ my "have to" stuff...now it is all gravy!
Post up pics at www.se4rj.com/gallery - register w/ a username and password and upload to the SE4RJ3 (2006) gallery. Thanks Mark!
It's 10:30pm and I've got food to buy and a school project to finish. 
05-10-2006, 06:40 PM
#1243
Registered User
Everything is working out for me also. Got my t-case mount from Toyota today got my driveshaft on. All i have to do is bleed brakes, clutch, and put axleshafts in the front axle. We should be there tomorrow night.
05-10-2006, 07:29 PM
#1244
Contributing Member
Join Date: Aug 2002
Location: High Point NC
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yotaman
Everything is working out for me also. Got my t-case mount from Toyota today got my driveshaft on. All i have to do is bleed brakes, clutch, and put axleshafts in the front axle. We should be there tomorrow night.
05-10-2006, 07:47 PM
#1245
Registered User
Originally Posted by Stump1883
That is awesome Greg, I can't belive you pulled it all together, can't wait to see ya pull up, we'll be sure to have a cold oen ready for ya. I think you win for the biggest last minute project rush.
05-10-2006, 08:53 PM
#1246
Registered User
Join Date: Jan 2005
Location: Home of Pure American Metal
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Just finished packing the trucks, Picking up the trailer in the morning, leaving around 1 so should see you guys between 8 and 9 tomorrow night. Bamachem, if you'll weld on my sliders that would be awesome. I'm not bringing the nice ones. just some steel bars that will work for the trip. See you guys tomorrow... well I guess today since its almost 1am.
Mike
Mike
05-11-2006, 03:39 AM
#1251
Contributing Member
Join Date: Aug 2002
Location: High Point NC
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NCSU-4runner
packed up and heading out 
Drive safe everyone, rather be talking with you than about you.
05-11-2006, 04:06 AM
#1253
it's all YOU, STEVE! i'll let you handle it!
too bad steve will be on a plane in 2 hours and won't see this...
either way, one of the 3 of us will burn them on for ya.
i got all the groceries and beverages at the house, loaded up all the SE4RJ loot and my skid/belly pan that's still wrapped in cardboard. i packed the welder, helmet, gloves, tools, angle grinder, extra wheel, flapper, etc. that should do it for tools. i'll have to prime the skid/belly w/ some rustoleum and just put it on at crawford's in the morning. sucks to do it at the last minute, but that's life. i'm heading to the house at about 3 today to finish packing, then i'll pick the old man up at about quarter to five, head back to the house to get the accord (so he'll have a ride back to the airport on sunday), then we're heading out. we should be there at the cabin about 2 hours later, and then on to crawfords shortly after that. i'm thinking about 8 or so for arriving at crawfords.
had a little scare this morning though. i'm driving the runner to work - oh, by the way, it's raining here today and scheduled to rain/mist all day - and i pushed the button for AWD. got flashing lights. thought "no problem" and slid it into neutral on the trans. no dice. flashing light and a hard disconnet in the ADD. tried about 15 times on the way to the office this morning. finally, i pulled into the parking lot and tried it one more time while turning the front wheels back and forth and "CLINK!" - light comes on stead and all is good. tried out 4hi and 4lo and all is working now. it's only been driven maybe a few hundred miles in the last 3 months, and none in AWD, so i guess it's just a little "stiff" from not getting used. (note to self - drive the runner to the store once a week and put it in AWD when doing it)
05-11-2006, 04:34 AM
#1254
Contributing Member
Join Date: May 2002
Location: Tempe, Arizona
Posts: 5,278
Likes: 0
Received 0 Likes
on
0 Posts
05-11-2006, 04:38 AM
#1255
Contributing Member
Join Date: May 2002
Location: Tempe, Arizona
Posts: 5,278
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bamachem
it's upside-down welding w/ flux. that's lots of molten spatter.
it's all YOU, STEVE! i'll let you handle it!
it's all YOU, STEVE! i'll let you handle it!
I'll be at the airport in 30 minutes. We're 3 hours behind you. Which may be an issue, If I stay up to midnight, it's only 9 AM for me. We're on Pacific time now.
05-14-2006, 03:57 AM
#1260
it's on http://www.se4rj.com & one here at https://www.yotatech.com/forums/show...867#post899867
