Ok, so I've searched and searched, and all I could find was write up's on the wiring diagrams. I bought my runner a few months ago and have done a few mods to it. Now I'm getting to reinstalling my hella's because the guy that previously owned it, for some reason cut the wires coming from the lamps and took the switch out. What's the best way to reinstall them? I have about a foot and a half of wires coming from the lamp. One black and one blue. I want to hook a switch up as well. What do I need to buy and how do I do it?

 

here ya go http://www.ultimateyota.com/index.ph...26&topic=387.0
go with Diagram 2

 

Thanks Elton, but do you know what kind of wires I need to go from the light to the relay, and from the relay to the switch?

 

What do you mean what kind of wires? You mean guage? I have some installed on my 4runner. What I did was install an aux fuse block and then ran 14 guage wire to all my relays and lights. The wire doesn't get hot or anything.

 

I hit a snag in my project. I have everything hooked up except for the green wire that comes from the switch to the aux fuse box. I don't have an aux fuse box. I looked everywhere and can't find it. Is there other places I should be looking?

 

just hook it up to anything thats getting 12volts all the time i just ran it back to the battery useing a inline fuse holder