Hella 4000s converted to HID
#22
Thread Starter
Contributing Member
iTrader: (1)
Joined: May 2006
Posts: 2,262
Likes: 1
From: B'ham, AL
The Euro beam is a focused beam for great distance, while the Cornering beam offers a wide, even spead of light. Here's a link showing the different beam patterns: http://www.4x4connection.com/tech/hellatech5.htm
I find that the Cornering beam works great for the trails I frequent b/c of the wide even light spread it offers.
I find that the Cornering beam works great for the trails I frequent b/c of the wide even light spread it offers.
Last edited by Rock Slide; Sep 3, 2008 at 11:17 AM.
#25
Thread Starter
Contributing Member
iTrader: (1)
Joined: May 2006
Posts: 2,262
Likes: 1
From: B'ham, AL
Thanks.
Nope, no pics. All the wiring is too well hidden for a picture to be of any help.
I just used a standard wiring kit. It was left over from my IPFs atop my old roof basket. The wiring ran from the battery, to a relay, (grounded of course) and then to the roof lights. For these front mounted lights, I rerouted the wiring from the roof to the ballasts at the bumper.
IIRC, each ballast has a pos & neg wire. So I took both pos wires from both ballasts and spliced them into the one pos wire from my original wiring. Did the same thing with the 2 neg wires from the ballasts...just spliced them into the one neg wire from my original wiring.
Hope that makes sense
Nope, no pics. All the wiring is too well hidden for a picture to be of any help.
I just used a standard wiring kit. It was left over from my IPFs atop my old roof basket. The wiring ran from the battery, to a relay, (grounded of course) and then to the roof lights. For these front mounted lights, I rerouted the wiring from the roof to the ballasts at the bumper.
IIRC, each ballast has a pos & neg wire. So I took both pos wires from both ballasts and spliced them into the one pos wire from my original wiring. Did the same thing with the 2 neg wires from the ballasts...just spliced them into the one neg wire from my original wiring.
Hope that makes sense
Last edited by Rock Slide; Sep 8, 2008 at 08:11 AM.
#29
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
The Classifieds GraveYard
34
Oct 6, 2021 03:03 PM
coryc85
86-95 Trucks & 4Runners
27
Dec 5, 2015 08:42 AM
Cycles
86-95 Trucks & 4Runners
8
Sep 29, 2015 06:37 AM
Scotttekoch
General Electrical & Lighting Related Topics
5
Sep 28, 2015 10:30 PM



How did you connect the ballast with your exiting wire? any pic's

