eletrical help please.
Feb 8, 2010 | 06:49 AM
#1
Thread Starter
Registered User
Joined: Feb 2009
Posts: 3
Likes: 0
eletrical help please.
Good day friends!
well here's what I got. An 84' 2WD PU manual trans original motor was a 22r. Needless to say the 22 blew up. I have a running 20r laying around. I stuck it in. Think I have everything hooked up, except a few wires. So here is where I am having issues. I have power, lights come on, fan works inside cab. However, when you place the ignition to start or run, NOTHING. No cranking, no dash lights nothing. And yes I looked at all the fuses. All good. Took a test light had my girlfriend place switch in start, and tested what I though was the starter wire. No power.
What am I doing wrong, what am I missing. Any Ideas?
Oh yea if anybody has a schematic of the fuse panel cover in the engine bay and the fuse panel cover in the cab, I would be of great help.
Thanks for your help and time.
well here's what I got. An 84' 2WD PU manual trans original motor was a 22r. Needless to say the 22 blew up. I have a running 20r laying around. I stuck it in. Think I have everything hooked up, except a few wires. So here is where I am having issues. I have power, lights come on, fan works inside cab. However, when you place the ignition to start or run, NOTHING. No cranking, no dash lights nothing. And yes I looked at all the fuses. All good. Took a test light had my girlfriend place switch in start, and tested what I though was the starter wire. No power.
What am I doing wrong, what am I missing. Any Ideas?
Oh yea if anybody has a schematic of the fuse panel cover in the engine bay and the fuse panel cover in the cab, I would be of great help.
Thanks for your help and time.
Thread
Thread Starter
Forum
Replies
Last Post
ToyotaMD
Vehicles - Parting Out
0
Sep 22, 2015 04:49 AM
Esibnitsud
86-95 Trucks & 4Runners
0
Jul 30, 2015 08:19 PM
