I'm baaaaack.....
Feb 5, 2015 | 08:43 AM
#1
Thread Starter
Registered User
Joined: Sep 2009
Posts: 383
Likes: 2
From: Richland WA
I'm baaaaack.....
Hello again YotaTech... it's been a while!
If you don't remember (Heck I barely remember... and I built the thing) this is my old build thread. https://www.yotatech.com/forums/f199...le-aav-226237/
Well, after taking a bit of time away from anything offroad, I decided that it was time to sell the X5 and get another Yota build going.
So. This time around, I'm going to do things differently. While I made the 3.0 the best it could possibly be, I think I'll be going with a 3rd gen this go-round. I like the 3.4 and I like some of the creature comforts that come with the newer runners.
So, now comes the question... Tacoma or 4runner...
I like them both and they will both meet my needs.
I may throw a curveball and do an 80 series cruiser.
It's off to craigslist I go!
Anyone have any recommendations?
If you don't remember (Heck I barely remember... and I built the thing) this is my old build thread. https://www.yotatech.com/forums/f199...le-aav-226237/
Well, after taking a bit of time away from anything offroad, I decided that it was time to sell the X5 and get another Yota build going.
So. This time around, I'm going to do things differently. While I made the 3.0 the best it could possibly be, I think I'll be going with a 3rd gen this go-round. I like the 3.4 and I like some of the creature comforts that come with the newer runners.
So, now comes the question... Tacoma or 4runner...
I like them both and they will both meet my needs.
I may throw a curveball and do an 80 series cruiser.
It's off to craigslist I go!
Anyone have any recommendations?
Feb 5, 2015 | 09:30 AM
#2
Registered User
Joined: May 2009
Posts: 578
Likes: 11
From: Southern NH
Nice job on the other Runner. The (stamped steel?) frames on the 3rd gens are mostly all rotted out up here in the northeast, I looked into several the but the price:rot ratio just wasn't there so ended up with another 2nd gen. Probably less of an issue in CA. Check up in the passenger wheel well either way.
