Need help.: are 2013 tacoma TRD shocks compatible with 2008 4runner
05-28-2013, 09:30 AM
#1
Registered User
Thread Starter
Join Date: May 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Need help.: are 2013 tacoma TRD shocks compatible with 2008 4runner
Hi everyone. Im sorry if this question is been asked before, if so please post a link if u know it.
I like to change the shocks on my 2008 4runner and I found a almost new set of bilsteins from a 2013 Tacoma TRD package. Does anyone know if this shocks fit my 08 4runner?
I like to change the shocks on my 2008 4runner and I found a almost new set of bilsteins from a 2013 Tacoma TRD package. Does anyone know if this shocks fit my 08 4runner?
05-28-2013, 11:03 AM
#2
The front ones might do you know the part #???
The rear ones because of the different suspensions will not be bolt on.
If you can make your own mounts you can make them work if you can calculate what travel you need..
The part numbers would be a big help.
The rear ones because of the different suspensions will not be bolt on.
If you can make your own mounts you can make them work if you can calculate what travel you need..
The part numbers would be a big help.
05-28-2013, 11:45 AM
#3
Registered User
Thread Starter
Join Date: May 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for the reply. If I need to mikie mouse something I'm sure my mechanic can figure it out.
Will post the bilstein part numb soon here's my part numb for the stock
4851069555 front
4853080372 rear
Last edited by ttbmer; 05-28-2013 at 02:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[PacSoWest]: Looking for a electric locking differential motor/ actuator
AaronM
Items Wanted
0
07-08-2015 07:15 PM
Suprarossa
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
0
07-06-2015 05:21 AM
