Hi everyone. I plan on adding a Long Tru Cool transmission cooler with some braided lines. I also plan on adding a transmission temp sensor to the inlet of the stock rad transmission cooler. Would like to know what kind/size threads are used on the input and output of the rad tranny cooler so I can have everything ready when I install it. I've search a bunch of sights with no luck. I also called a couple of dealerships and the parts guys had no idea. Thanks!

 

Hey I'm not sure if this helps but the link in my sig is the cheapest place I found long tru cool cooler + it came with everything I needed minus a length of ATF hose. but if your adding braided it sounds like you've got that covered. I didn't add any gauges or sensor either. So really all I have to offer is this link. haha take some pictures of the sensor install please! Good luck.

p.s. that website has every size of cooler the link is just specific to the cooler I installed.

 

I bought the cooler already, but thanks for the link anyway. Not really sure how to find this info out. I might go by the dealership and see if I can talk to a technician. I know that most people use the barb fittings so this is not an issue. Thanks for your input anyway!

 

Nobody has a clue?