I'm going to have a rebuilt engine in my posession for my 86 4Runner 22re Auto trans. soon. If somone wanted to make a few hundred bucks and have my help installing the engine and doing an auto transmission flush I would appreciate it and compensate you accordingly. I am pretty mechanically inclined but I just don't have an available garage or shop to do the work in, nor do I have all the tools necessary. I will have to trailer the truck to the location as well. If someone was willing to work out a trade I would be willing to throw in a couple toyota axles I have laying around. I have a solid front axle from an 84 4Runner that is complete hub to hub with IFS calipers/newer brake pads, brand new FJ60 rotors and a 4:10 diff. I also have an IFS rear axle out of a 94 4cyl, drum to drum w/ebrake cable, welded 4:10 diff, will need to replace one wheel stud. I also have a set of 4 chrome modular rims that fit Toy or Chevy, they are 15x8 6 oon 5.5, 3 inch backspacing, no lug nuts or center caps. If anyone would be interested in helping me with this project PM me and we will work out the details. Thanks for looking! Golden, Lakewood, Arvada, Littleton, or anywhere near the ski areas (I live in Dumont, by Idaho Springs) would be preferred, but will travel further if the deal is right. I'm not rich and if I can help a fellow member make a few extra bucks, and save a few bucks, I'll be happy.

 

I don't know what he'd charge but Mike @ ORS would do a good job for you (Arvada) .

http://www.offroadsolutions.com/meetthestaff.htm

 

I have 3 toyota tech contacts I can give you. 2 are master techs and have replaced 4 or 5 engines each on the side in their 4 runners... All of them are good freinds of mine. 2 of them are members here but not on very often.

If you want their numbers PM me