FS[NorRock]: ISO 01' stock intake/box + BCM
#1
ISO 01' stock intake/box + BCM
Dropped my intake and cracked the air-box inside the filtered area, also have dry rotted/cracked rubber T-body coupling that is going to leak air soon so need these parts of the intake.
Also need a Body Control Module after getting mine a little wet in a mud-hole (water came up to steering wheel and got it wet). I need the non VATS/chip key BCM part number 82730-35310, comes out of the kick panel above left knee along with fuse box.
Not super critical, was going to get parts together to fix it this spring. I'll probably hit a junkyard if no one has the BCM but I've had good luck finding parts here.
-Tom
Also need a Body Control Module after getting mine a little wet in a mud-hole (water came up to steering wheel and got it wet). I need the non VATS/chip key BCM part number 82730-35310, comes out of the kick panel above left knee along with fuse box.
Not super critical, was going to get parts together to fix it this spring. I'll probably hit a junkyard if no one has the BCM but I've had good luck finding parts here.
-Tom
Thread
Thread Starter
Forum
Replies
Last Post
skoti89
Offroad Tech
2
Mar 22, 2013 11:45 AM
2shots1beer
Pre 84 Trucks
5
Dec 31, 2012 06:50 AM



