2006 6spd taco new clutch issue
#1
2006 6spd taco new clutch issue
Hey guys,
My buddy had a shop do his 2006 4wd clutch.
Yes, he broke every rule i warned him about.
So, not a toyo mech and unclear what brand of parts.
They did change the flywheel.
After the clutch install, there is a squeeking, chirping sound that disappears when the clutch pedal is depressed 1/4 way and a slight shudder shake when releasing the clutch in 1st gear.
The clutch is engaging when clutch pedal is lifted 1/2 way.
Any ideas? It does not take off smoothly.
Thanks!
My buddy had a shop do his 2006 4wd clutch.
Yes, he broke every rule i warned him about.
So, not a toyo mech and unclear what brand of parts.
They did change the flywheel.
After the clutch install, there is a squeeking, chirping sound that disappears when the clutch pedal is depressed 1/4 way and a slight shudder shake when releasing the clutch in 1st gear.
The clutch is engaging when clutch pedal is lifted 1/2 way.
Any ideas? It does not take off smoothly.
Thanks!
Last edited by sharrack; 03-17-2018 at 08:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Runner_Zuke
95.5-2004 Tacomas & 96-2002 4Runners
10
06-06-2008 10:26 AM