05-07 Skid plate
09-12-2007, 11:29 AM
#1
Registered User
Thread Starter
Join Date: Aug 2005
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
05-07 Skid plate
I saw this beefy skid plate yesterday while I was surfing around, I thought that I saved it but didn't and now it's non existant!!
all I remember was that it was huge and went way back under the engine and cost like 500 bucks does this sound familiar to anyone? Was it a dream!?
all I remember was that it was huge and went way back under the engine and cost like 500 bucks does this sound familiar to anyone? Was it a dream!?
09-12-2007, 08:59 PM
#6
Registered User
Join Date: Oct 2002
Location: LA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
bud built has it in 3 pieces that you can purchase separately or all together as a combo unit. nice stuff.
www.budbuilt.com/new/
www.budbuilt.com/new/
09-13-2007, 07:57 AM
#7
Registered User
Thread Starter
Join Date: Aug 2005
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Dam this sucks I'm never gonna find it again. All of those listed look like good plates but the one I'm talking about was from a much smaller company. The plate looked at least a 1/4" thick and was one piece that wrapped from just behind the bumper all the way down and over the whole suspension/diff and everything. It seriously looked like the truck could do a nose dive from the 4th story and drive away.
I gotta keep lookin, I found it off of a link of a link of a link on pirate so it's probably gone forever
I gotta keep lookin, I found it off of a link of a link of a link on pirate so it's probably gone forever
Trending Topics
09-13-2007, 08:02 AM
#8
email AJ at Bentup.com
He has made some for folks on ttora.com
Here is thread showing another one from ttora.com:
http://ttora.com/forum/showthread.php?t=72106
He has made some for folks on ttora.com
A LOT.
Its now fully belly plated from front to rear with 3/16" steel. There's also new braces welded to the cross member and the end of the belly plate is connected to the frame with an L-shaped bracket and some bolts to give it extra strength. Contact AJ @ Bentup of you're interested in something similar.
Its now fully belly plated from front to rear with 3/16" steel. There's also new braces welded to the cross member and the end of the belly plate is connected to the frame with an L-shaped bracket and some bolts to give it extra strength. Contact AJ @ Bentup of you're interested in something similar.
http://ttora.com/forum/showthread.php?t=72106
Last edited by dropzone; 09-13-2007 at 08:15 AM. Reason: added pic's and a link...
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
06-13-2022 07:40 PM
kawazx636
The Classifieds GraveYard
34
10-06-2021 03:03 PM
Aaronmarston
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
0
09-22-2015 09:39 PM
