Visual Differences in Camshafts?
Jul 17, 2014 | 06:52 AM
#1
Thread Starter
Registered User
Joined: May 2014
Posts: 6
Likes: 0
Visual Differences in Camshafts?
Hey all,
I am looking to buy a motor from a guy and he swears that it has a Crawler 440 cam in it. I am wondering if there is anyway to tell just by looking at the cam? Are there any special markings or stampings? Does a stock cam have any markings or stampings on it? Thanks in advance for all the help.
I am looking to buy a motor from a guy and he swears that it has a Crawler 440 cam in it. I am wondering if there is anyway to tell just by looking at the cam? Are there any special markings or stampings? Does a stock cam have any markings or stampings on it? Thanks in advance for all the help.
Jul 17, 2014 | 01:58 PM
#2
Registered User
iTrader: (1)
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
The only way to really know is to measure the cam lobes unless you have really good Micrometer eyes.
Then you need to know the specs of the cam your looking at
If you can look at it you can measure it not perfect but close enough.
Then you need to know the specs of the cam your looking at
If you can look at it you can measure it not perfect but close enough.
Thread
Thread Starter
Forum
Replies
Last Post
foampile
03+ 4Runner/GX470, & 05+ Tacomas
1
Dec 18, 2022 01:29 PM
