Vacuum lines and cruise control
03-05-2007, 08:53 PM
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Eastern Washington
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Vacuum lines and cruise control
I have an 87 4x4 22re 5 speed w/ac, can someone tell me where the cruise control vacuum line connects...also the PAIR valve vacuum line. Thanks guys, this site has been a huge help to me.
Last edited by old4runner; 03-06-2007 at 06:09 AM.
03-06-2007, 05:47 PM
#2
Have a look at this photo here:
http://www.4crawler.com/4x4/CheapTri...ine_Pix/8.html
Do you see the round 3-port fitting that screws into the intake plenum?
My cruise was spliced via a 3 way tee into one of the hoses that goes into this 3port fitting.
Mine is not a 4 cyl nor a factory cruise, but all it needs is a source of vacuum as far as I know. Nothing lost if you try it.
http://www.4crawler.com/4x4/CheapTri...ine_Pix/8.html
Do you see the round 3-port fitting that screws into the intake plenum?
My cruise was spliced via a 3 way tee into one of the hoses that goes into this 3port fitting.
Mine is not a 4 cyl nor a factory cruise, but all it needs is a source of vacuum as far as I know. Nothing lost if you try it.
03-06-2007, 07:22 PM
#3
Registered User
Join Date: Mar 2004
Location: Charlotte, North Carolina
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Cruise
I think mine is going the same thing. I have cruise on my 87 22re 4x4 and i puch the cruise button and the green light turns on and than i turn teh handle on the steering wheel to set it and nothing happens. I was think it was a vacum problem but all my hoses are fine. What else could this be?
Thread
Thread Starter
Forum
Replies
Last Post
TokyoD23
95.5-2004 Tacomas & 96-2002 4Runners
4
07-12-2015 06:01 AM
