Torsion bars and keys questions
#1
Torsion bars and keys questions
Ok guy I lifted my truck awhile back with the new ball joint spacers then a few days ago I put a new rearend and leafs springs under the rear and now the back sits 3ft 6 1/2 in from ground to center of wheel well and the front sits 3 ft 2 1/2 in from ground to center of wheel well what can I do to lift the front to sit even with the back the torsion bar have already been cranked all the way up any ideas thanks in advance
#2
Registered User
Join Date: Sep 2016
Location: Northern CA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Maybe remove the spacers in the rear (assuming there are spacers back there)? Some take to the stance doesn't hurt but not sure if 3 inches looks like too much.
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: Downey Offroad Torsion Bars
04sport4x4
Axles - Suspensions - Tires - Wheels
4
02-19-2016 12:08 PM