Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Tire weight question

Old Jan 12, 2010 | 05:23 AM
  #1  
BackGateYota92's Avatar
Thread Starter
Registered User
 
Joined: Nov 2009
Posts: 1,356
Likes: 1
From: Windsor,Virginia
Tire weight question

Hey there, im currently running 33x13.50 super swamper ltbs but have been looking to change to a 35x12.50 bfg km2. the SS ltb weighs more than the km2 does. so my question is do i still need to regear right away? thanks again
Reply
Old Jan 12, 2010 | 12:37 PM
  #2  
tc's Avatar
tc
Contributing Member
 
Joined: Nov 2005
Posts: 8,875
Likes: 3
From: Longmont, CO
What gearing do you have now?

Between the weight, and rolling resistance (due to tread and bias ply/radial construction) you will probably notice less of a difference than most people.
Reply
Old Jan 12, 2010 | 01:42 PM
  #3  
BackGateYota92's Avatar
Thread Starter
Registered User
 
Joined: Nov 2009
Posts: 1,356
Likes: 1
From: Windsor,Virginia
i have stock gearing now. i should have stated im getting new gears in the summer. i was wondering if it will be more bearable with the bigger but lighter tires on
Reply
Old Jan 12, 2010 | 04:32 PM
  #4  
tc's Avatar
tc
Contributing Member
 
Joined: Nov 2005
Posts: 8,875
Likes: 3
From: Longmont, CO
Ok, so that narrows it down to 3.91, 4.10, 4.30, 4.56, and 4.88 ... in other words, just about all the possible options.

Engine, tranny, stock tire size?

Door jamb gearing code? (search)
Reply
Old Jan 12, 2010 | 05:31 PM
  #5  
BackGateYota92's Avatar
Thread Starter
Registered User
 
Joined: Nov 2009
Posts: 1,356
Likes: 1
From: Windsor,Virginia
i have an auto that didnt come with 31's. lol the pevious owner said its 4.10s so i assume he's right
Reply
Old Jan 12, 2010 | 05:33 PM
  #6  
BackGateYota92's Avatar
Thread Starter
Registered User
 
Joined: Nov 2009
Posts: 1,356
Likes: 1
From: Windsor,Virginia
oh its 3.0 v6
Reply
Old Jan 12, 2010 | 06:56 PM
  #7  
tc's Avatar
tc
Contributing Member
 
Joined: Nov 2005
Posts: 8,875
Likes: 3
From: Longmont, CO
If auto, should be 4.30 or 4.56.

Either way, you need to save up for gears in a hurry if you drive it on the highway.

If you have the cash now, a tranny cooler would be HIGHLY recommended as the torque converter is not going to lock up much, so the tranny is just gonna shear the crap out of the fluid on the highway.

5.71's would be recommended for best highway performance with the monster overdrive and 35's. If it's a trail-only rig, and never goes fast enough to need overdrive, just about any gearing will be fine. Maximum strength gears are 4.56 and 4.88.
Reply
Old Jan 12, 2010 | 07:02 PM
  #8  
Teuf's Avatar
Registered User
 
Joined: Apr 2009
Posts: 5,592
Likes: 24
From: Dixon, Ca
Well at least 4.88 Aye?
Reply
Old Jan 13, 2010 | 02:30 AM
  #9  
BackGateYota92's Avatar
Thread Starter
Registered User
 
Joined: Nov 2009
Posts: 1,356
Likes: 1
From: Windsor,Virginia
thanks yall i might just wait until i get gears this summer but what is a good affordable tranny cooler? lol
Reply
Old Jan 14, 2010 | 03:21 AM
  #10  
Dingman's Avatar
Registered User
 
Joined: Mar 2006
Posts: 308
Likes: 0
From: Iowa
You should already be aware that those are two different types of tires. The LTB is a bias ply and suck on the road, wear quickly and ride like CRAP. But they rule off road, very good tire.

The GY isn't really a mud tire, but obviously it's a radial and I can't comment on off road capability as I haven't owned any.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djpg2000
Tires & Wheels
11
Nov 11, 2020 04:56 AM
coffey50
Offroad Tech
17
Jul 28, 2015 10:55 AM
DrZero
General Vehicle Related Topics (Non Year Related)
18
Jul 24, 2015 11:31 PM
God's Bounty Hunter
Pre 84 Trucks
6
Jul 8, 2015 12:54 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 09:29 AM.