Throtle stop screw
May 20, 2011 | 04:26 AM
#1
Thread Starter
Registered User
Joined: Nov 2008
Posts: 247
Likes: 0
From: Vancouver< WA
Throtle stop screw
Where is my idle stop screw?
[IMG]
[/IMG]
Maybe someone could post up a pix of what I'm missing. '86 22re
I'm working on poor gas mileage and idle up issues. My TPS tested bad then I noticed no idle stop screw. I don't think my '86 came with a dashpot?
Going to head over to pick n pull to see if I can find something that will work.
Also any tips on adjusting it would be helpful. My haynes manual says to adjust so the vacuum advance port is just visible.
[IMG]
[/IMG]Maybe someone could post up a pix of what I'm missing. '86 22re
I'm working on poor gas mileage and idle up issues. My TPS tested bad then I noticed no idle stop screw. I don't think my '86 came with a dashpot?
Going to head over to pick n pull to see if I can find something that will work.
Also any tips on adjusting it would be helpful. My haynes manual says to adjust so the vacuum advance port is just visible.
Thread
Thread Starter
Forum
Replies
Last Post
