radiator support assembly?
#1
Registered User
Thread Starter
Join Date: May 2004
Location: Clarkston, Mi
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
radiator support assembly?
Hey all! just curious if anyone knows if this will work or not. A local body parts wharehouse by my house has listed in there online catalog for 4runner parts 84 - 89 a complete Radiator support assembly for and 89 -95 pickup and 89-91 4runner.
or you can buy the individual peices LH, RH, Upper and Lower supports for 85-89 P/U and 85-89 4runner.
I wrote them an e-mail asking about it, but i'm sure there not open at this time of the weekend. does anyone on here know if this part will work, or is it a typo on the warehouse online catalog?
Thanks
or you can buy the individual peices LH, RH, Upper and Lower supports for 85-89 P/U and 85-89 4runner.
I wrote them an e-mail asking about it, but i'm sure there not open at this time of the weekend. does anyone on here know if this part will work, or is it a typo on the warehouse online catalog?
Thanks
#2
Registered User
my guess its a screw up
The 89 was the last year for the Gen1 body on the 4Runner, and the first year for the rounded Gen3 4x4 pickups
The Gen1 4Runner uses the Gen2 pickup stuff
1989 4Runner stuff confuses everyone
To make matters worse the 22RE was more like the later 22RE (straight TB) but the Trans had the transfer case stick in the xfer (aka rear shift)
Loads of fun
The 89 was the last year for the Gen1 body on the 4Runner, and the first year for the rounded Gen3 4x4 pickups
The Gen1 4Runner uses the Gen2 pickup stuff
1989 4Runner stuff confuses everyone
To make matters worse the 22RE was more like the later 22RE (straight TB) but the Trans had the transfer case stick in the xfer (aka rear shift)
Loads of fun
Thread
Thread Starter
Forum
Replies
Last Post