r150 trans into a 92 v6
Feb 4, 2009 | 01:56 PM
#1
Thread Starter
Registered User
Joined: Feb 2008
Posts: 8
Likes: 0
r150 trans into a 92 v6
I am curious if an r150 trans from a taco can be swaped into my 92 3.0 4x4? Tansfer case issues, i think it sits opposite of what i have now? so can i use my transfer case i have now on a r150 or would i just have to re-route my exhaust? wiring issues, like sppedometer read out or something?
Last edited by Sdecurti; Feb 4, 2009 at 02:13 PM.
Feb 4, 2009 | 02:51 PM
#2
Contributing Member
Joined: Nov 2005
Posts: 8,875
Likes: 3
From: Longmont, CO
Bellhousing will bolt up, as you mention tcase will be driver drop, I'm not sure if the tcase will bolt up - probably not judging from the development of tcase double adapters.
The regular transmission behind a 92 V6 is an R150 also, so I'm wondering why you would want to do this... just put in the R150 tranny that belongs there!
The regular transmission behind a 92 V6 is an R150 also, so I'm wondering why you would want to do this... just put in the R150 tranny that belongs there!
Feb 5, 2009 | 01:08 PM
#3
Thread Starter
Registered User
Joined: Feb 2008
Posts: 8
Likes: 0
Bellhousing will bolt up, as you mention tcase will be driver drop, I'm not sure if the tcase will bolt up - probably not judging from the development of tcase double adapters.
The regular transmission behind a 92 V6 is an R150 also, so I'm wondering why you would want to do this... just put in the R150 tranny that belongs there!
The regular transmission behind a 92 V6 is an R150 also, so I'm wondering why you would want to do this... just put in the R150 tranny that belongs there!
Thread
Thread Starter
Forum
Replies
Last Post
Odin
86-95 Trucks & 4Runners
3
Sep 26, 2015 06:56 PM
