Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Put on the tube doors!!

Old Jun 19, 2010 | 08:25 AM
  #21  
Duckie's Avatar
Registered User
 
Joined: May 2009
Posts: 255
Likes: 0
From: Tucson, AZ
I know a few others and I are doing Chivo on the 11th. Just a half day run, Im wanting to play at 3 feathers and the punch bowl. Lol I'm not even concerned about getting to the falls really. But you're more than welcome man. We're meeting at circle k on tanque verde at 7am.
Reply
Old Jun 19, 2010 | 04:28 PM
  #22  
86autoyota's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 90
Likes: 0
From: Tucson, AZ




Here's the shots of the pins that i replaced the original ones with so that changing the doors would be a very quick process. And the top pin had to go in from the bottom of the hinge up, due to clearance issues.

Also i realize where the clip is stuck in the first picture makes no sense haha
Reply
Old Jun 19, 2010 | 04:33 PM
  #23  
GenXr's Avatar
Registered User
 
Joined: Mar 2007
Posts: 721
Likes: 0
From: Dayton, OH
I vote NO on the sheet metal.
Reply
Old Jun 19, 2010 | 07:59 PM
  #24  
4x4jeffyota's Avatar
Registered User
 
Joined: Mar 2010
Posts: 493
Likes: 0
From: Gosnell,Arkansas
Originally Posted by 86autoyota




Here's the shots of the pins that i replaced the original ones with so that changing the doors would be a very quick process. And the top pin had to go in from the bottom of the hinge up, due to clearance issues.

Also i realize where the clip is stuck in the first picture makes no sense haha

where'd you get those pins man?
Reply
Old Jun 19, 2010 | 09:08 PM
  #25  
1981 yota's Avatar
Registered User
 
Joined: Jul 2009
Posts: 1,639
Likes: 4
From: Cle Elum washington
doors look great
Reply
Old Jun 19, 2010 | 10:01 PM
  #26  
Duckie's Avatar
Registered User
 
Joined: May 2009
Posts: 255
Likes: 0
From: Tucson, AZ
Originally Posted by 4x4jeffyota
where'd you get those pins man?
I'm curious too man. I've been wanting just to take my doors off, and a quick pin that fits nicely with no rattle would be awesome.
Reply
Old Jun 19, 2010 | 11:20 PM
  #27  
4Yoter's Avatar
Registered User
 
Joined: Jul 2009
Posts: 222
Likes: 0
From: Tucson, Arizona
Hey duckie So u gona go on the 11th I believe i am too. Itll be nice to have another yota instead of all the jeeps and blazers lol

Heres how I did my doors



Had to grind a little to get around the screws that hold the door half of the hinge
Reply
Old Jun 19, 2010 | 11:27 PM
  #28  
86autoyota's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 90
Likes: 0
From: Tucson, AZ
Originally Posted by 4x4jeffyota
where'd you get those pins man?
Just took a piece of the original pins that i cut out down to Ace hardware and browsed around until i found something that would work.

I think total the hardware came out to be like 11 bucks
Reply
Old Jun 19, 2010 | 11:30 PM
  #29  
86autoyota's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 90
Likes: 0
From: Tucson, AZ
Oh btw, 4yoter and Duckie, i double checked and I will be in town on the 11th, not to invite myself on your run or anything but i'd love to go out with some yotas instead of like was said before the usual blazers and jeeps haha. I have a couple buddies with yotas that dont really get out there much anymore, I will see if they would be interested, if you guys don't mind.
Reply
Old Jun 20, 2010 | 12:10 AM
  #30  
4Yoter's Avatar
Registered User
 
Joined: Jul 2009
Posts: 222
Likes: 0
From: Tucson, Arizona
Fine with me but up to duckie I guess he was the one who started the run (I dont think he'll mind)
Reply
Old Jun 20, 2010 | 08:04 AM
  #31  
crackerjack's Avatar
Contributing Member
 
Joined: May 2006
Posts: 618
Likes: 0
From: cookeville tn.
Got mine on too.....I cut a piece of heavy tarp to hang over the sides while truck is parked so rain doesn't get in cab. Works good, also use the tarp to throw under rig on the trail if need be
Reply
Old Jun 20, 2010 | 05:04 PM
  #32  
Duckie's Avatar
Registered User
 
Joined: May 2009
Posts: 255
Likes: 0
From: Tucson, AZ
Sounds good guys. Over at TOR I only have like 4 guys. A jeep, ford bronco, and a amc eagle of it's up and running, so bring on teh yotas. I'm only in for a half day, as I will be going to dinner with the finace and fam that evening. But I'm down for playing at 3feathers. Maybe just going to the punch bowl and then going by the falls. We'll see what's up. I'll keep you all posted.
Reply
Old Jun 20, 2010 | 07:42 PM
  #33  
86autoyota's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 90
Likes: 0
From: Tucson, AZ
Alrighty, yeah just lemme know
Reply
Old Jun 20, 2010 | 08:34 PM
  #34  
4x4jeffyota's Avatar
Registered User
 
Joined: Mar 2010
Posts: 493
Likes: 0
From: Gosnell,Arkansas
Originally Posted by 86autoyota
Just took a piece of the original pins that i cut out down to Ace hardware and browsed around until i found something that would work.

I think total the hardware came out to be like 11 bucks

dude thats great, as soon as my uncle gets my new/old tranny in I am doing to do that, I love finding great and cheap things to do to my Toyota
Reply
Old Jun 20, 2010 | 08:36 PM
  #35  
4x4jeffyota's Avatar
Registered User
 
Joined: Mar 2010
Posts: 493
Likes: 0
From: Gosnell,Arkansas
Originally Posted by 4Yoter
Hey duckie So u gona go on the 11th I believe i am too. Itll be nice to have another yota instead of all the jeeps and blazers lol

Heres how I did my doors



Had to grind a little to get around the screws that hold the door half of the hinge
that looks great man
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jasonty
Pre 84 Trucks (Build-Up Section)
41
Dec 23, 2018 01:00 PM
adammtb
Items Wanted
6
Jul 27, 2015 11:57 AM
DrZero
General Vehicle Related Topics (Non Year Related)
18
Jul 24, 2015 11:31 PM
HaydenConQueso
The Fab Shop
0
Jul 12, 2015 05:22 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 01:21 PM.