yotarob2005

YES, yes it does suck. If anybody has any ideas as to where I can get a replacement body panel please let me know.

myyota

Get a hold of slacker (Corey) at toyota fiberglass www.toyotafiberglass.com, he has metal and fiberglass 4Runner sides. He is in Canada but he can ship anywere.

Teuf

The sides go all the way to the front, I think TOYFIBER should make shorter patch pieces.

Drunner

Its been a couple of years since I have seen it but I saw a website that sold rear corner panels you weld on the back. they were like 1/8 or 1/4 thick that way this would not happen again. Maybe you could use this piece instead of trying to find a quarter panel.

yotarob2005

Thanks, I sent him an e-mail & left a voice message.

That is what I am hoping to find, maybe a piece I can weld in from the center of the wheel opening back.

Now that would be awesome.

xxxtreme22r

might fix the side issue, but not his tail light buckets.

xxxtreme22r

here you go:

http://www.addictedoffroad.com/cornerpanels.html

Teuf

His Damage goes further than THAT covers. Maybe a junk yard, and cut off from a dead 88 4 runner?

yotarob2005

That would be the most ideal thing to do, find a truck that I could cut the sheet metal hat I need off of. I did speak with Corey (Slacker), he is a super nice guy & I might go ahead with his panel if I can't find anything localy, but shipping from Canada to Texas is going to eat my lunch.

xxxtreme22r

I know, but in case he finds a replacement panel and wants to add this to it.

Teuf

Ah ok, I see he may be able to pound some of the dents out. And that patch would at least
make it look much better.

Lumpy

I bet your tummy rolled 9 times when you heard that crunch!!! Man that sucks!!!

.

Wheelindealin

My 93 ext cab, all new paint


Like tha color?

yotarob2005

Sure did, I pitched a small trail side fit actually. Good thing there where no little ears to hear what I had to say about it. Here are a few pics from before the damage.

1981 yota

looks great wheeling

91_TOYOTA_4x4

love it!! more pics of that clean machine?

alfio

are you of argentine descent by any chance?

Wheelindealin

There u go man, gettin my tailpipes redone out behind the tires...the guy didint do it right ha but it still sounds good
Oh yeah and puttin the bed liner in too

rattlewagon

yotarob: nice lookin truck you have there. Really diggin the paint with the soft top. When I get dents in my DD I just think " Its one step closer to a trail rig" haha.

wheelin: Nice clean truck. Those tires look like they fit good!

yotarob2005

Thanks man! It is a work in progress. I bought the truck with the sole intention of building an offroad rig, it doesn't even have tags, LOL. I'm still really upset about the damage though, It's more than just a dent.