Post Your Pics!!!
#3682
Registered User
Join Date: Jun 2009
Location: San Jose, CA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Lumpy! I love it! It took me 6 years to finally pick up another one. I used to have an 87 runner, but I had to sell it due to financial burdens! We all know how that goes... and now that I have my hands one this sweet piece, I am finally whole again!
#3684
Registered User
Join Date: Jun 2009
Location: San Jose, CA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Streetlancer,
My buddy and I made the 1.5" body lift out of Ultra High Molecular Weight Polyethylene, aka UHMW. Then we made a spacer out of round aluminum stock for the front bumper which raised it up to avoid the gap, and we also fabbed up a radiator bracket out of bar stock; however the radiator bracket is not necessary as 1.5" does not cause any interference with the fan shrowd. I bought some longer bolts and nylocks for the body mounts and we reused 2 of the old body mount bolts in the bumper locations which is subtle and few notice.
My buddy and I made the 1.5" body lift out of Ultra High Molecular Weight Polyethylene, aka UHMW. Then we made a spacer out of round aluminum stock for the front bumper which raised it up to avoid the gap, and we also fabbed up a radiator bracket out of bar stock; however the radiator bracket is not necessary as 1.5" does not cause any interference with the fan shrowd. I bought some longer bolts and nylocks for the body mounts and we reused 2 of the old body mount bolts in the bumper locations which is subtle and few notice.
#3685
#3686
Registered User
haha is that right?? lol well he's outta luck even tho i wont be able to see my yota for a couple years there aint no way i'm sellin it haha but yeah i'm in medford
#3688
Registered User
Join Date: Dec 2008
Location: NFM, Florida
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
I called up a buddy and we messed with it for a good hour before we got it right. And of course everybody that pulled in the parking lot had to say something, and say "well if it was me I'd do it like....." or "What you need to do is...." I told one guy what he needed to do was get the f' away from me before I beat his ass.
What a mess.
#3689
Registered User
Join Date: Sep 2009
Location: boone nc
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Man, that happened to me while I was towing my s10 with my 'yota. I turned into a gas station to fill up and the dolly didn't pivot back, the straps came loose and the s10 kept goin'.
I called up a buddy and we messed with it for a good hour before we got it right. And of course everybody that pulled in the parking lot had to say something, and say "well if it was me I'd do it like....." or "What you need to do is...." I told one guy what he needed to do was get the f' away from me before I beat his ass.
What a mess.
I called up a buddy and we messed with it for a good hour before we got it right. And of course everybody that pulled in the parking lot had to say something, and say "well if it was me I'd do it like....." or "What you need to do is...." I told one guy what he needed to do was get the f' away from me before I beat his ass.
What a mess.
i guess it just need a good whackin
#3695
Registered User
Join Date: Jan 2010
Location: Atlanta GA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
#3696
Registered User
Join Date: Jul 2009
Location: Tucson, Arizona
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
#3698
Registered User
Join Date: Apr 2010
Location: okc oklahoma
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
heres my 86 with a chevy sas and chevy 4.3l motor swap. now its in the shop gettin the motor wired runnin, a set of custom drive shafts made, custom fuel system with a 20gallon fuel cell, and a new brake system with a disc conversion in the rear of the corp 14 bolt. hope to have it runnin in next month or so before summer ends
#3700
Registered User
Join Date: Jan 2006
Location: BC, Canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Finally finished my LC coil / Balljoint spacer lift and got the 33x10.5 BFG MidTerrain KM2's installed so now I can post some pics.
1991 Hilux Surf SSR-G:
And one shot while the work was in progress because it shows off my other 89-95 Toyota truck...a 1990 Toyota Liteace
1991 Hilux Surf SSR-G:
And one shot while the work was in progress because it shows off my other 89-95 Toyota truck...a 1990 Toyota Liteace