post-teardown long-haul trip... it made it! me so happy!
#21
Contributing Member
iTrader: (3)
Yeah defianetly mark the wiring harness. I just used a sharpie and labeled the conectors and the associated plugs with numbers and that worked out great. Definately pay attention to how the harness gets snaked in thru the lower plenum and that area. Once that's out of the way its a cake walk!!! I had a lot of fun doin mine! I got some pics on my gallery if you wanna looksey!
#22
Registered User
Join Date: Jul 2008
Location: Grew up in S.C.V, So Cal.....now in Hampstead, NC
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Good luck 'Bleeder. Just remember....take your time, esp near the end. We all pretty much get into a rush then.......lol!
#23
Contributing Member
Thread Starter
oh yeah, I'm going through it very carefully. I know the harness you speak of through the plentum, lol. I removed the intake not long after I got the truck to clean out all the black gunk in there, and that pissed me off that I had to go as far as unplugging the harness from the trans and what-not just to remove the lower manifold
but I'm definately going to have to label everything good, cause it's gunna be apart for at least 2 weeks, maybe more, cause I'm going the whole 9 yards and scrubbing down and repainting the engine bay (with undercoating, not paint ), dropping the trans to replace the rear seal on the t-case cause it's leaking too, and I'm also going to clean it up a little too, cause it's got mud and clay and all kinds of crap caked on it, which I'm sure isn't helping to keep it cool, lol
I can't wait, I'm so excited and I just can't hide it...
but I'm definately going to have to label everything good, cause it's gunna be apart for at least 2 weeks, maybe more, cause I'm going the whole 9 yards and scrubbing down and repainting the engine bay (with undercoating, not paint ), dropping the trans to replace the rear seal on the t-case cause it's leaking too, and I'm also going to clean it up a little too, cause it's got mud and clay and all kinds of crap caked on it, which I'm sure isn't helping to keep it cool, lol
I can't wait, I'm so excited and I just can't hide it...
#25
Registered User
Bleeder.........you're going to have a lot of fun rebuilding. It's such an accomplishment. And, it's just a fun motor to rebuild. Easy peasy. I'll help when I can, if you need it.
#27
Bleeder that is a clean truck man. It makes me sure I want to take the factory decals off of the sides of mine. I have a white reg cab too. If you are anything like me you probably wont sleep too well tonight in excitement for tomorrow.
Last edited by Chutchman; 05-02-2009 at 09:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
PNW94Runner
86-95 Trucks & 4Runners
3
09-29-2015 02:55 PM
Cycles
86-95 Trucks & 4Runners
8
09-29-2015 06:37 AM