Post pics of 90-95 4Runner IFS lifted pics
Apr 13, 2010 | 03:38 PM
#105
Registered User
Joined: Apr 2010
Posts: 27
Likes: 0
From: St. Augustine, Florida
Can anyone link me to a thread of an actual install of bj spacers and/or LC coils, with pictures.. I'm really interested in this, but I'm not sure if it's something that I can do in my garage or not.
Edit: Awesome trucks guys.
Edit: Awesome trucks guys.
Apr 13, 2010 | 03:54 PM
#108
Registered User
Joined: Jan 2009
Posts: 6,086
Likes: 17
From: Just North of Pittsburgh
Well the LC coils went in fairly well... The hardest part is compressing the LC coils. You have to take the old shocks off as well. Its not all that bad. It took me about 5 hours I believe and I was working alone with a ton of rust. The hardest part I had was the pan hard bar drop bracket. I have a few pic's in my sig.
Apr 13, 2010 | 03:58 PM
#109
Registered User
Joined: Jul 2009
Posts: 222
Likes: 0
From: Tucson, Arizona
I installed my bj spacers and LC coils in my friends drive way. Just needed a jack (used 2 and it helped) and a few jackstands. And one word of advice its not necessary but it helps AIR TOOLS.
Apr 13, 2010 | 04:56 PM
#112
Registered User
Joined: Mar 2010
Posts: 2
Likes: 0
From: Alaska
When I first got it. 3" body lift to clear the tires and the 3.4 motor swap.
Then I put a ToyTec 2" lift with BJ spacers and the heavy duty rear OME springs.
These are old pictures but since then: XD9000 installed, all roof junk removed along with running boards, and the light have been rewired. Planning on chopping it and possibly bobing it this summer along with lockers.
Then I put a ToyTec 2" lift with BJ spacers and the heavy duty rear OME springs.
These are old pictures but since then: XD9000 installed, all roof junk removed along with running boards, and the light have been rewired. Planning on chopping it and possibly bobing it this summer along with lockers.
![[N8]'s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%23683e7f' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>[</text></svg>)
May 25, 2010 | 05:05 AM
#116
Registered User
Joined: Mar 2010
Posts: 348
Likes: 0
From: SE PA.
after 300,000 miles she got a face lift pro comp 4in coils in rear and bj spacers in front and someday when procomp gets around to shipping me my new shocks I will test drive it
[IMG]
[/IMG]
[IMG]
[IMG]
[/IMG][/IMG]
[IMG]
[/IMG][IMG]
[IMG]
[/IMG][/IMG]
Last edited by mfwimg82; May 25, 2010 at 05:06 AM.
