OME Springs installed
#1
OME Springs installed
Well I finally got around to puting the OME 901 springs in..WHOA what a difference! However I am wondering if they will settle down a bit because they are now almost 1 1/2 in higher than the front...
I am thinking of cranking up the Tbars maybe.
My question is : Clockwise turn on the screw puts them up I assume so to gain one inch how much of a turn?
Herse the picture link
http://pg.photos.yahoo.com/ph/eaglen...cd.jpg&.src=ph
Makes my 31's look small
thanks for suggestions
Tom G
I am thinking of cranking up the Tbars maybe.
My question is : Clockwise turn on the screw puts them up I assume so to gain one inch how much of a turn?
Herse the picture link
http://pg.photos.yahoo.com/ph/eaglen...cd.jpg&.src=ph
Makes my 31's look small

thanks for suggestions
Tom G
Last edited by tog2; Aug 21, 2006 at 03:53 PM.
#3
well if you crank your torsion bars your alignment will go out of whack..Take it to an alignment shop and get a front end alignment and tell them you want the front level with the rear..they shouldn't have any problems
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
3
Jan 30, 2026 01:57 PM
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM
justdifferentials
Just Differentials
1
Aug 15, 2015 05:25 PM




