Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

New Lift and little baby 31's

Old Jun 21, 2009 | 05:02 PM
  #121  
jagermeister's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 211
Likes: 0
From: Stafford, VA
They were ok nothing fancy, but when i was trying to pull that guy i got in some deep sand and had her in 4 low and was spinning all 4 but wasn't dinging me deep into the sand it was nice. but i was pleased with how they did in the sand.
Reply
Old Jun 23, 2009 | 07:06 PM
  #122  
94Runner4x4's Avatar
Registered User
 
Joined: May 2006
Posts: 625
Likes: 0
From: Lawrenceville/Statesboro, GA
looks great man! and i mounted the tranny cooler right behind the plastic valence to the frame.

From the front:


Kind of hard to tell, but this one is from underneath:
Reply
Old Jun 23, 2009 | 08:02 PM
  #123  
jagermeister's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 211
Likes: 0
From: Stafford, VA
Oh alright sweet sweet, idk if i could mount mine there case in va we have to have lisense plates front and rear and well the plate would block that i think.

but on a side note went out tonight for my first night wheeling trip and let me tell you, thats a whole nother side to wheeling. but i did come to the concuslsion that i need more lights : ) haha. And i was coming up this step hill and if you go to far right u hit this good side rut and i forgot it was there. Nothing broke just nocked my tow out a lil on the right side. And oh yea it droped down so hard and then back up i almost broke my sun roof with my head and now have a nice little cut and bump on my forhead. Oh well thats all part of wheeling right?
Reply
Old Jun 23, 2009 | 08:51 PM
  #124  
94Runner4x4's Avatar
Registered User
 
Joined: May 2006
Posts: 625
Likes: 0
From: Lawrenceville/Statesboro, GA
Yea i sort of had the same problem with my front license plate. If you can tell, I lowered it about an inch an zip tied it there with black zip ties. It stayed until I changed bumpers and mounted it the right way. And the transmission cooler works great even with it blocked a little.

Reply
Old Jun 23, 2009 | 09:21 PM
  #125  
toylocost's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,705
Likes: 12
From: Yotatech, because Pirate is too expensive. NorCal.
How has your acceleration decreased since the tire change? Thats something I'm most worried about.

Your an auto with 4.88s and I'm a manual with 4.56s so I'm guessing it should be about the same.
Reply
Old Jun 23, 2009 | 09:26 PM
  #126  
toylocost's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,705
Likes: 12
From: Yotatech, because Pirate is too expensive. NorCal.
Whats going on in this picture? This fella looks sketchy...
Reply
Old Jun 23, 2009 | 09:27 PM
  #127  
Tubbyfatty's Avatar
Registered User
 
Joined: Nov 2008
Posts: 1,903
Likes: 2
From: Hillsboro, OR
hahah i didnt even notice that.
Reply
Old Jun 24, 2009 | 10:27 AM
  #128  
jagermeister's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 211
Likes: 0
From: Stafford, VA
Haha thats my sister and her boyfreind, he was showing her something, ha but ya i no it looks a little sketch.

But about the acceleration it has deffently gone done when im at like a dead stop, but its not to bad just noticable. And thanks for that informarion 94Runner4x4
Reply
Old Jun 25, 2009 | 08:16 AM
  #129  
jagermeister's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 211
Likes: 0
From: Stafford, VA
So I was adjusting the toe on the runner after knocking it out on the trails the other night and I came to the realization; You know you have done something right when you need to go buy a new jack just to get your front end off the ground.
Reply
Old Jun 25, 2009 | 09:06 AM
  #130  
Tubbyfatty's Avatar
Registered User
 
Joined: Nov 2008
Posts: 1,903
Likes: 2
From: Hillsboro, OR
Originally Posted by jagermeister
Haha thats my sister.....
More pics of said sister? hahaha.
Reply
Old Jul 15, 2009 | 10:20 AM
  #131  
jagermeister's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 211
Likes: 0
From: Stafford, VA
So I was sitting at home today and i got pretty bored so i was like alright lets go see what i can do on the 4runner. So i get outside and next thing I know my muffler is unbolted from the cat and it sounds nasty. Its something that everyone should try and but not for long cause im pretty sure its illegal in VA so you no might get a ticket but it still sounds sweet.
Reply
Old Jul 16, 2009 | 02:53 PM
  #132  
bobo jones's Avatar
Registered User
 
Joined: May 2009
Posts: 15
Likes: 0
From: Virginia Beach
just make sure you dont make any trips to virginia beach they will pull you over in a heart beat then pull out the measurin tape to make sure your not to high, then try to hassle you some other way. they suck out here but sweet lookin rig. thats the same set up im tryin to do
Reply
Old Jul 22, 2009 | 02:28 PM
  #133  
jagermeister's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 211
Likes: 0
From: Stafford, VA
Ya i put the muffler back the next day of having it off, when ever i would drive around the cops always stared at me and i was thinking that one of them was eventually one of them would give me a ticked. But thanks, this set up has been working pretty good for me.
Reply
Old Jul 23, 2009 | 12:02 PM
  #134  
San Martian's Avatar
Registered User
 
Joined: Dec 2007
Posts: 63
Likes: 1
That looks great.

wait till you get a 5spd
Reply
Old Jul 23, 2009 | 06:33 PM
  #135  
jagermeister's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 211
Likes: 0
From: Stafford, VA
haha oh man i wish i had 5spd in her, it might happen cause im not to sure how much longer this tranny is going to to last, anyone ever watching this tread ever put a manual in an auto?
Reply
Old Jul 23, 2009 | 06:43 PM
  #136  
toylocost's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,705
Likes: 12
From: Yotatech, because Pirate is too expensive. NorCal.
Have you stuffed those tires yet? Any rubbage? I am worried about rubbing, I really want 12.5s but I know I'll be safe with 10.5s.
Reply
Old Jul 23, 2009 | 06:48 PM
  #137  
jagermeister's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 211
Likes: 0
From: Stafford, VA
ive stuffed the rear and it was rubbing on the bumper and sence ive got the T bars cranked so doesn't really flex enough to put the tire anywhere where it would kill anything, but it does rub the inter finder well and it grabs the black plastic think and makes a noise. But i haven't had any problems with what i have around in (talking about trails).
Reply
Old Jul 23, 2009 | 06:54 PM
  #138  
silencetrigger22's Avatar
Registered User
 
Joined: Jul 2009
Posts: 9
Likes: 0
From: Little mountain town in Idaho
Originally Posted by RoBatt
Your 4runner will look awesome with some 33s good work
yeah man def get the km2 they are a great tire i just got mine great on the road after i get rubbing taken care of ill see how they do offroad

sorry had to post a pic
^^^^^^^^^^^^^^^^^^^^^^^^^ that is absolutely drop dead sexy.
Reply
Old Jul 23, 2009 | 07:31 PM
  #139  
toylocost's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,705
Likes: 12
From: Yotatech, because Pirate is too expensive. NorCal.
Originally Posted by jagermeister
ive stuffed the rear and it was rubbing on the bumper and sence ive got the T bars cranked so doesn't really flex enough to put the tire anywhere where it would kill anything, but it does rub the inter finder well and it grabs the black plastic think and makes a noise. But i haven't had any problems with what i have around in (talking about trails).
Well I dont have a problem ing the rear bumper or front fenders. But what is this plastic you are talking about. Actually if its plastic I probably dont care about it either.
Reply
Old Jul 24, 2009 | 08:50 AM
  #140  
jagermeister's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 211
Likes: 0
From: Stafford, VA
haha ya its not a problem to fix i just haven't gotten around to it, but the inter finder well all the way down on the bottem by the pinch wheld is where it grabs it.
Reply

Thread Tools
Search this Thread

All times are GMT -8. The time now is 01:31 PM.