When i can get some money together i want new wheels, and here is what i have been thinking of, will these fit my truck?
Here is what i REALLY want:

KMC XD Series 775 Rockstar 18" Black
Here is what i would take if the Rockstars not available:

American Racing Chamber 16" Teflon


I am really swinging towards the KMC XD RockStar Black 18" wheels. They will fit my 4Runner right? I only thought about the others if the KMC's dont fit.

 

Not sure, TOO expensive for my taste though.

 

In the future people wont use wheels anymore!

They'll use tweels

 

Post the pics into the thread and we'll tell you.

 

I am really stuck between the Rockstars 18" and the Chamber 16". they are both around the same price. Here are the Pics:
Here is what i REALLY like:

Here is what i would take if the Rockstars not available:

 

The rockstars will fit.

 

Good, then i think i will go with them, cause they look just smashing! and when i wrap them in either Pro Comp Xterrain or Nitto Mud Grapplers they will add some killer looks!

 

20" on a 3rd gen.

 

Those kick a$$. thanks for the pic. What is everyones thoughts on them?

 

Always on back order. Too much bling and too big.


...but thats just my opinion

 

x2 IMO, i wouldn't want to see all that rim crack on a rock or pothole. Plus i hate the looks of trucks/suvs with huge rims and about half an inch of side wall, not saying thats what it will look like, thats just my opinion.

But then again, im the fan of the $40 a rim rockcrawler rims, so To Each His Own!

 

I like them, i'm not a big fan of steelies. And i am thinking of ordering internal beadlock as well.

 

Well i think i have made my choice
18" KMC XD 775 Rockstar black wheels
with
33x12R18 Nitto Mud Grapplers (i did want pro comps but they dont sell the 2 ply in 18" rims sizes)

 

too much bling for me but i guess thats what your going for.
i just ordered new steelies today.

 

Well i plan on doing a HUGE overhaul with my 4Runner, it wont look the same in the slightest way. But that is a few months away. Till then i am planing ahead for what i am going to do.

 

Does anybody on YT know if i have to buy some spacers? i saw on a taco forum that a 05+ taco had to get some spacers for his taco so the wheel "don't look goofy". So does anybody with KMC's know if i should get some spacers?

 

Find out the BS and width of the wheel and we'll start from there...

 

Buy a locker instead. Please don't "bling" your 4Runner. Its a slippery slope, before you know it, you will be idolizing Ricky Martin.

Of those wheels, the American Racing Chamber 16" Teflon look best, though black steelies would look a lot tougher and cost way less.

 

Well i want the rockstars because they are not alot of bling but more than ugly(my personal opinion) steelies. And i really like the militray star in the middle.

 

18x9, 6 on 5.5 / Bolt Pattern; Back Spacing = 5 in.; Offset = 0 mm.; Hub Bore = 108

or

18x9, 6 on 5.5 / Bolt Pattern; Back Spacing = 5 in.; Offset = 0 mm.; Hub Bore = 78.1

Those are my two choices for the 18" wheels.