My rig came with a ghetto 3" BL. I'd like to drop it 1" by using stock bushings and spacers. I don't want to run polyurethane and can't find a source for stock bushings. Any suggestions?

 

You can find polyurethane bushings on line and there better than the stock rubber bushings, but if you want the stock bushings then you will probably need to go to the dealer for them.

 

Poly would probably be your best bet and cheaper than stock.

stock pt# diagram for 94 4x4 xtra cab





CUSHION SUB-ASSY, CAB MOUNTING, NO.1 UPPER
approx 16.00ea
CUSHION SUB-ASSY, CAB MOUNTING, NO.1 LOWER
approx 14.50ea
CUSHION SUB-ASSY, CAB MOUNTING, NO.2
approx 36.50ea
CUSHION SUB-ASSY, CAB MOUNTING, NO.3
approx 100.00ea

so you would be looking at approx 330 dollars just for the bushings alone through a dealer/internet store.

 

dang that's spendy. Guess I'll go back and look at ployu again.

Thanks