A little HELP!!!
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: Jersey
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
A little HELP!!!
hey guys just a couple questions for ya on an 86' 22r pickup
Where can i get the socket to remove the huge bolt inside the hub?
what size is it? looking like upwards of 50mm
I need a new snap ring and what looks to be the guide that goes right behindthe sanp ring against the huge bolt.... and idea where i could pick these up?
Where can i get the socket to remove the huge bolt inside the hub?
what size is it? looking like upwards of 50mm
I need a new snap ring and what looks to be the guide that goes right behindthe sanp ring against the huge bolt.... and idea where i could pick these up?
#2
Contributing Member
#4
Registered User
Join Date: Sep 2006
Location: Trail, BC/Edmonton, AB
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
54mm is the proper size, but 2 1/8" will also work. I got a socket (3/4" drive) from an industrial tool distributor. Socket and 1/2" drive set me back $30CDN.
#6
Contributing Member
iTrader: (1)
Join Date: Apr 2005
Location: Colorado
Posts: 4,683
Likes: 0
Received 0 Likes
on
0 Posts
welcome to YT. https://www.yotatech.com/forums/showthread.php?t=74565