Line x whole truck?
#1
Registered User
Thread Starter
Join Date: Feb 2007
Location: Hudson Wisconsin
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Line x whole truck?
Anyone ever line x'd there whole truck? if so please post pics. I found an article about some one who did it to his cherokee heres the link http://jeep.off-road.com/jeep/articl....jsp?id=257941 So if anyone has any input on these bedliners or others itd be nice to here. thanks in advance
Last edited by 92sr5yota; 08-19-2007 at 10:43 AM.
#3
Registered User
Thread Starter
Join Date: Feb 2007
Location: Hudson Wisconsin
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
yeah im really thinkin about it cause my paint job is shot, looks like someone else did part of there truck on another thread with rino liner
#4
Registered User
Join Date: Jul 2007
Location: 26.3 road miles from the AT (VA)
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
I had a buddy of mine who did his Wrangler. It was sweet. It was done inside and out...once he was done mudding he just hosed it out. But it was expensive, even though he worked for LineX.
If you're going to do a DIY job make sure you do plenty of sanding and prep. I've seen it peal off of more than on rig. Oh...and that same guy said many times people who have done their truck (inside) bed themselves and wanted to get it lineX'ed....well...he had to remove the old stuff which wasn't hard. He would take a putty knife, scrape up the corner and then peel the whole thing out in one full piece.
But if you do it right...it would look and function great.
If you're going to do a DIY job make sure you do plenty of sanding and prep. I've seen it peal off of more than on rig. Oh...and that same guy said many times people who have done their truck (inside) bed themselves and wanted to get it lineX'ed....well...he had to remove the old stuff which wasn't hard. He would take a putty knife, scrape up the corner and then peel the whole thing out in one full piece.
But if you do it right...it would look and function great.
#5
Registered User
Join Date: Apr 2006
Location: Vancleave, Mississippi
Posts: 1,368
Likes: 0
Received 0 Likes
on
0 Posts
there's a local guy on here that durabak'd his 1st gen runner and a CJ he owns. looks pretty good, here's the thread.
https://www.yotatech.com/forums/f116...dliner-106094/
https://www.yotatech.com/forums/f116...dliner-106094/
#6
Registered User
Join Date: Apr 2007
Location: Calgary, AB
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
there's a local guy on here that durabak'd his 1st gen runner and a CJ he owns. looks pretty good, here's the thread.
https://www.yotatech.com/forums/f116...dliner-106094/
https://www.yotatech.com/forums/f116...dliner-106094/
Thread
Thread Starter
Forum
Replies
Last Post
dirtrider0129
Buying & Selling Advice - Feeler/Gauging Interest
10
06-24-2015 12:24 PM