Help with Dana 44
03-27-2008, 02:49 PM
#1
Registered User
Thread Starter
Join Date: Feb 2008
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Help with Dana 44
I have a Ford 9" front axle with Dana 44 outers, I bought Chevy flattop knuckles for high steer and Chevy hubs and spindles. When I tried to install them the locking hub bottomed out on the spindle before it would go in. Does anyone understand this?? Let me know......
03-27-2008, 04:04 PM
#3
Registered User
Eeeeeh yuck. Just for s and giggles does the hub bottom out when you have it in the unlocked position? Hubs are easier to install when they are compressed but you might have checked that. I would also reccomend pirate, there are some mega Dana heads there.
Last edited by Luvmeye22re; 03-27-2008 at 04:05 PM.
Thread
Thread Starter
Forum
Replies
Last Post
myotherrideisayoshi
86-95 Trucks & 4Runners
1
09-29-2015 05:41 AM
Cebby
Solid Axle Swaps, All Years
44
02-20-2007 11:33 PM
