Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Drum roll please!!! new addition to my toyota family

Thread Tools
 
Search this Thread
 
Old Oct 1, 2009 | 08:16 PM
  #41  
camo31_10.50's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
as long as this mo fo will get ATLEAST 20mpg's after the gear swap..i'll be ok..LOL

it says on my door jamb that i had 225's from the factory..so im guessing 4.10's..
Reply
Old Oct 1, 2009 | 08:22 PM
  #42  
Jay351's Avatar
Contributing Member
 
Joined: Feb 2007
Posts: 9,055
Likes: 10
From: maple ridge, British Columbia, Canada
Good luck Thats a big truck to push around hehe. Gears will make her drive nice though
Reply
Old Oct 1, 2009 | 08:28 PM
  #43  
camo31_10.50's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
I appreciate it Jay!

just found out i gots 4.56's!!!! gear code G254(according to this guy http://www.off-road.com/trucks4x4/ar....jsp?id=274535) means i gots 4.56's!!!!!!!!!!!!!

woooo that means it wont be such a dang DOG on the freakin road..lol..

should feel close to the same as my 22r with 4.10's and 31's i hope!!
Reply
Old Oct 1, 2009 | 08:33 PM
  #44  
camo31_10.50's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
(G254)since G stands for 8" axle..
the 25 stands for 4.56's
and the 4 stands for 4pinion axle..since it is a v6!:banger :: banger:
Reply
Old Oct 1, 2009 | 08:36 PM
  #45  
Jay351's Avatar
Contributing Member
 
Joined: Feb 2007
Posts: 9,055
Likes: 10
From: maple ridge, British Columbia, Canada
Yeah, it won't be that bad at all. The 4.88's would help though... I drove for bout 5-6 months with 33's and 4.56's. I do have exhaust and performance cams though
Reply
Old Oct 1, 2009 | 08:39 PM
  #46  
peow130's Avatar
Registered User
 
Joined: Sep 2008
Posts: 3,887
Likes: 16
From: Spokane, WA
Originally Posted by Jay351
wel I pulled mine out (14mm wrench) and I looked into it, it was packed full of some sort of sandy/muddy/gear oil mixture. So I ripped the cap off, and used a screwdriver to jam the crap out.

I put the cap and spring back in, but I didnt like it. So the next week I got some brass fittings and hose and extended the breathers

If you take care of her, she will take care of you my man!

I wouldnt bother putting speakers in the doors. Put some nice 4" speakers in the dash for tweets, some good 6x9's in the back and get yourself a sub or two
+1 to that, my pinion seal was leaking and i had a clogged up diff breather.
nice runner mang
Reply
Old Oct 1, 2009 | 08:45 PM
  #47  
camo31_10.50's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
yea..i still see 4.88's in the future..heck if i still have the '86 in that time maybe i could get the 4.56's put in there!..maybe? idk about the whole 4pinion diff in 4cyl axle? lol

im sooooo excited...this keeps gettin better and better..lol
Reply
Old Oct 1, 2009 | 09:04 PM
  #48  
70elcoss's Avatar
Registered User
 
Joined: Jun 2009
Posts: 292
Likes: 0
From: No cal but NORCAL
i have a 90' with a 3.slow, 4.56's, and a 5speed and i get around 16-17 mpg but i can get around 21 if its strictly highway miles... on a roadtrip i took this weekend i got around 21mpg cruising 75-80mph in 5th gear.
Reply
Old Oct 1, 2009 | 09:05 PM
  #49  
70elcoss's Avatar
Registered User
 
Joined: Jun 2009
Posts: 292
Likes: 0
From: No cal but NORCAL
but i have 31's i think you said you have 33's right?
Reply
Old Oct 1, 2009 | 09:05 PM
  #50  
Jay351's Avatar
Contributing Member
 
Joined: Feb 2007
Posts: 9,055
Likes: 10
From: maple ridge, British Columbia, Canada
It'l fit. Worse case senerio you have to drill new holes in the pinion flange. No biggie
Reply
Old Oct 1, 2009 | 09:07 PM
  #51  
camo31_10.50's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
yep i got a 4in lift and 33's..LOL so i'll be gettin a bit less than that!
Reply
Old Oct 1, 2009 | 09:12 PM
  #52  
Jay351's Avatar
Contributing Member
 
Joined: Feb 2007
Posts: 9,055
Likes: 10
From: maple ridge, British Columbia, Canada
Its the gearin that kills it. That and cruising the hwy too fast.

Once I get over 110km/h my mileage goes to poop. This summer I took a 600km roadtrip. On the way up I took the koke, average speed of 130km/h with stints of 150km/h.
On the way home I took another hwy, averaged around 100-110km/h I saved more than $10 on fuel on the return trip

stick around 60mph any faster and wind resistance becomes a huge factor with lift and big mud tires (mud tires grab the air and create huge amounts of resistance).

If I stay at 100km/h I get 21mpg, easy If I had a/t tires I would probibly get 22-23mpg!

sorry kinda blabbering... just polished off a big rum n coke hehe
Reply
Old Oct 2, 2009 | 05:50 AM
  #53  
flashkl's Avatar
Registered User
 
Joined: Oct 2008
Posts: 1,584
Likes: 0
From: Burlington, VT
nice runner, man.
Reply
Old Oct 2, 2009 | 06:03 AM
  #54  
Booosted Supra's Avatar
Registered User
 
Joined: Aug 2007
Posts: 429
Likes: 1
From: Audubon NJ
wow thats a clean ass find, good luck!
Reply
Old Oct 2, 2009 | 09:51 AM
  #55  
camo31_10.50's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
thanks everybody..im really proud of myself for actually going through with the deal..
therewere a few moments that i wanted o back out because it needs the work that it does..
Reply
Old Oct 2, 2009 | 10:02 AM
  #56  
Monochrome's Avatar
Registered User
 
Joined: Oct 2008
Posts: 193
Likes: 2
From: Seattle, WA
Awesome find! Very jealous of your interior, it looks awesome. Will be following this thread.
Reply
Old Oct 2, 2009 | 11:19 AM
  #57  
camo31_10.50's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
EVERYDAY i feel like gettin out there and rippin that motor out and startin on it..lol
but i cant because my dad wants me to wait for a bit first..lol..and besides i still need to find an oil pan for it so i can start it up!!..maybe the knock is something stupid and simple that doesn't require me to pull that big dude outta there..lol
Reply
Old Oct 2, 2009 | 03:35 PM
  #58  
camo31_10.50's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
anybody else??
Reply
Old Oct 2, 2009 | 04:05 PM
  #59  
92 TOY's Avatar
YotaTech Milestone-Two Millionth Post
 
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
As promised. I HATE YOU!!

Seriously I do.

Every bit of encouragement I gave you was offset by pure jeaolousy of you finding such a thing.

Good Job!!

Now you know what you will be doing with every free moment in your life.

Nice find.

Still hate you.
Reply
Old Oct 2, 2009 | 04:46 PM
  #60  
pb4ugotobed's Avatar
Registered User
 
Joined: Jul 2009
Posts: 335
Likes: 0
Take your time man, don't rush into anything. Trust me, these motors aren't exactly fun to work on (mostly due to old, crispy vacuum lines and poor design/placement of certain components). Do it right... First get an oil pan and a tube of fipg. Get the pan on there, fill it up with oil and see what you have to work with first. First step of diagnosis is to duplicate the concern (which is a knocking noise). First you have to duplicate it to see where it's coming from. Then take the necessary steps to correct the problem. If it's bad rod knock, then pull out the engine and do yourself the favor of swapping in a 5vz instead. It'll be a little more work, but in the end you'll get WAY better gas mileage, make way more power, and have a much more reliable truck for daily use (Especially with a 60 mile commute to school). Spend the extra money now, and you will thank yourself in the end. You have a nice truck... one worth hanging on to. Treat it right, and think long term down the road. Will you still be happy with 15mpg 2 or 3 years down the road, still having to shift to 4th (sometimes 3rd) to make it up the big hills without getting run over?

Just one man's opinion.
Reply



All times are GMT -8. The time now is 04:35 PM.