Hey, I just did a timing replacement on my 94 22re and the crank pulley wont slide on all the way. I've hit it hard with a 1/2 inch air gun and it wont slide any further. It needs about anot 1/4inch before the belts will be aligned properly.
What have i done wrong?
Any Ideas guys?

 

The woodruf key may be cocked a little, preventing the crank pulley from going over it completely. Check the key for position, burrs, dirt, etc. Check the slot in the pulley for burrs too.

 

Cool i'll check that out next weekend. Thanks for the tips!