My clock never worked, I took apart the dash today and found that it wasn't even hooked up to anything, It seems a previous owner liked to cut wires cause almost nothing electrical works and there's cut wires everwhere.

Are the four wires pictured for the clock? Anyone got a pic of witch pins they connect to on the clock so i can wire it up...

 

If those wires are for the clock then there should be a plug on the end of it that plugs into the back of the clock.

 

Yeah, but like he said the PO liked to cut wires....

I don't have a pic, but yeah that looks like the clock wiring. I'd go take one but damn if I didn't have the dash apart twice this week and I don't feel like tearing it apart again

 

Yeah someone before me cut a bunch of stuff up, Even the harness for the stereo , But I got that all sorted out.


Its in the right place, I just need a picture of the plug so I can put the wires in the right places, Id go to the pick n pull and snip one off but I've only found 1 of our trucks and it was completely gutted. You guys need to start killing your trucks so I can go scavenge for parts

 

No can do, bud, yotas are like Spartans. They never die.

 

oh they CAN die... but they've all got some sort of wizard spell on them and they come right back...

 

Here are the pins for the clock:

Pin 1: white/black stripe
Pin 2: green (mine has two green wires on the same terminal)
Pin 3: blue/yellow stripe
Pin4: gray/red stripe

The pictures show the connector with wires and how the connectors are numbered.