Hello,
I got a friend who just totaled his ZX2 and it has nice seats in it. They were unharmed. Nice bucket style, black with gray inserts. Stock. He said like 40-50 for both. How hard would it be to install them. The front has about the same curve on the mount. I would get everything off of them. The brackets to. They are very comfy. I think they are a good buy, what about you guys? I remember seeing a thread on this somewhere? Anyone know where it is?

Thanks

 

the price is right if there in good condition, and if they fit?? otherwise chop saw and welder

 

it wouldn't be too difficult to make your own mounting brackets. (or even to get them made)

i say go for it.

-shaeff

 

i just looked into this today. i wanted buckets in my 90 4x4pu and thought about supra seats,i started talking to a fella today about it and he said why not 4runner buckets? so i went to a parts yard and looked at a 93 4runner they will mount right in my 90 pu no alterations it looks like.has anyone done this and if so any draw backs like seat height or anything??

 

I put '93 4Runner seats in my '91 reg cab. They work ok, bottoms not too high.
Not much room to tilt back, maybe 2 or 3 notches back with the seat bottom slid all the way back. I'm 5'11", if you're this tall or taller it might be a bit more cramped than the bench seat. (Next time---xtra cab!)I added a bolt and nut on each seat at the front/inner mounting point, since my truck came w/ a bench seat and there's no reinforced mounting point there for the bench.

 

I've got buckets out of either an x-cab, or a 4 runner. Not sure because I bought the truck with them in it. The drivers seat has a height adjust knob so the height isnt an issue as it can be adjusted. The seats fit in alright, but you will need to drill some holes when you're replacing a bench because the bench doesen't have all the right mounting holes. I'm 6'1" and it fits me just fine, but I tend to like the seat further up than other people my height (I always move the seat up in my dads cars, and he's an inch shorter than me)

 

im 5'11 and my bench seat springs are gone so i want to sit up a bit,think i'll do it. i can get the buckets for $85 for both and they match my interior maybe even add the console.thanks